Home › Engine / Hybrid System › 3ZR-FAE ENGINE CONTROL › SFI SYSTEM › from 2015.04
NM3090E _51 Engine / Hybrid System _008644 3ZR-FAE ENGINE CONTROL _0048051 SFI SYSTEM CO CONTROL F

3ZR-FAE ENGINE CONTROL  SFI SYSTEM  CONTROL  VALVEMATIC CONTROL  


FUNCTION


a.

The VALVEMATIC effects coordinate control with the Dual VVT-i. It effects continuously variable control of the amount of intake valve lift, intake valve action angle and intake valve timing, as well as control of the exhaust valve timing, in accordance with the engine conditions. This results in improved engine performance and better fuel economy.


b.

The intake valve action angle varies between 106° CA and 280° CA, and the amount of intake valve lift varies between 1.1 mm (0.043 in.) and 11.5 mm (0.453 in.).


c.

The VALVEMATIC consists of a continuously variable valve lift controller assembly at the actuator and VALVEMATIC mechanism.


d.

Along with the use of this system, a vacuum pump assembly is provided in order to provide the proper brake control vacuum.

W111582C01
1.573,3.313 1.823,3.531 1.823,3.531 2.01,3.531 false 2.292,2.771 2.531,3.125 2.531,3.125 2.74,3.125 false 0.896,1.104 1.156,1.104 1.156,1.104 1.427,1.667 false 0.729,1.021 1.042,1.177 0.313,0.156 10 *1 2.781,3.052 3.094,3.208 0.313,0.156 10 *2 3.24,4.396 3.552,4.552 0.313,0.156 10 *3 1.781,4.385 2.094,4.542 0.313,0.156 10 *4 3.313,0.229 3.625,0.385 0.313,0.156 10 *a 2.052,3.458 2.365,3.615 0.313,0.156 10 *b
*1 Continuously Variable Valve Lift Controller Assembly
·

EDU

·

Motor Position Sensor

·

Action Angle Sensor


*2 Vacuum Pump Assembly
*3 Various Sensors *4 ECM
*a VALVEMATIC Mechanism *b CAN (Local Bus)



e.

The continuously variable valve lift controller assembly operates the VALVEMATIC mechanism in accordance with signals from the ECM in order to control the amount of intake valve lift and the intake valve action angle.


f.

The VALVEMATIC effects coordinate control with the Dual VVT-i and ETCS-i.

W126098E01
0.292,0.292 2.938,0.698 2.646,0.406 10 false Intake Mass Air Flow Meter Sub-assembly 0.792,0.906 2.656,1.313 1.865,0.406 10 false Crank Position Sensor 0.49,1.521 2.688,1.958 2.198,0.438 10 false Camshaft Position Sensor (Intake) 0.479,2.458 2.802,2.896 2.323,0.438 10 false Camshaft Position Sensor (Exhaust) 0.719,3.385 2.792,3.802 2.073,0.417 10 false Vacuum Sensor Assembly 0.49,4 2.781,4.417 2.292,0.417 10 false Accelerator Pedal Sensor Assembly 0.729,4.625 2.792,5.042 2.063,0.417 10 false Throttle Position Sensor 0.49,5.25 2.896,5.625 2.406,0.375 10 false Engine Coolant Temperature Sensor 1.156,5.875 2.698,6.26 1.542,0.385 10 false Starter Signal 0.906,6.479 2.729,6.865 1.823,0.385 10 false Vehicle Speed Signal 0.906,7.104 2.865,7.469 1.958,0.365 10 false Temperature Sensor 4.521,7.146 6.479,7.51 1.958,0.365 10 false VALVEMATIC Mechanism 6.323,5.885 6.854,6.219 0.531,0.333 10 false Engine 4.438,4.865 5.167,5.708 0.729,0.844 10 false Differential Roller Converter 4.594,4.531 5.156,4.792 0.563,0.26 10 false Motor 3.844,4.208 4.271,4.5 0.427,0.292 10 false CAN* 3.406,3.083 3.76,3.375 0.354,0.292 10 false ECM 4.625,3.729 4.979,4.021 0.354,0.292 10 false EDU 5.781,3.729 6.792,4.448 1.01,0.719 10 false Motor Position Sensor 5.771,4.635 6.781,5.354 1.01,0.719 10 false Action Angle Sensor 4.667,2.74 6.688,3.521 2.021,0.781 10 false Continuously Variable Valve Lift Controller Assembly 4.823,2.115 6.76,2.521 1.938,0.406 10 false Throttle Control Motor 4.531,1.208 6.708,1.927 2.177,0.719 10 false Camshaft Timing Oil Control Valve Assembly (Exhaust) 4.531,0.292 6.708,1.01 2.177,0.719 10 false Camshaft Timing Oil Control Valve Assembly (Intake) 0.25,7.573 1.906,7.823 1.656,0.25 10 false *: Local Bus


g.

The VALVEMATIC controls the amount of intake valve lift, intake valve action angle, intake valve timing and exhaust valve timing in order to achieve the following effects:

W127105E01
0.156,0.313 1.427,0.604 1.271,0.292 10 false - Upon Starting 0.156,0.615 1.823,0.938 1.667,0.323 10 false - Stopping Engine 2.344,0.146 2.646,0.365 0.302,0.219 10 false TDC 2.677,0.656 2.979,0.875 0.302,0.219 10 false IN 1.948,0.552 2.25,0.771 0.302,0.219 10 false EX 2.365,1.583 2.667,1.802 0.302,0.219 10 false BDC 2.354,1.865 2.656,2.083 0.302,0.219 10 false TDC 2.323,3.604 2.625,3.823 0.302,0.219 10 false TDC 2.354,5.302 2.656,5.521 0.302,0.219 10 false TDC 2.375,7.031 2.677,7.25 0.302,0.219 10 false TDC 2.354,3.281 2.656,3.5 0.302,0.219 10 false BDC 2.323,4.969 2.625,5.188 0.302,0.219 10 false BDC 2.344,6.719 2.646,6.938 0.302,0.219 10 false BDC 2.354,8.521 2.656,8.74 0.302,0.219 10 false BDC 1.938,2.344 2.24,2.563 0.302,0.219 10 false EX 2.802,2.469 3.104,2.688 0.302,0.219 10 false IN 1.917,4 2.219,4.219 0.302,0.219 10 false EX 2.708,4.031 3.01,4.25 0.302,0.219 10 false IN 1.906,5.719 2.208,5.938 0.302,0.219 10 false EX 2.74,5.896 3.042,6.115 0.302,0.219 10 false IN 1.979,7.531 2.281,7.75 0.302,0.219 10 false EX 2.771,7.729 3.073,7.948 0.302,0.219 10 false IN 0.156,2.073 1.823,2.396 1.667,0.323 10 false At First Idling 0.125,3.729 1.792,4.375 1.667,0.646 10 false Before Engine Warm-up (Except First Idling) 0.115,5.542 1.781,6.188 1.667,0.646 10 false At Light and Medium Load (After Warm-up) 0.094,7.219 1.708,7.875 1.615,0.656 10 false At Heavy Load (After Warm-up) 4.927,0.604 5.229,0.823 0.302,0.219 10 false EX 5.76,0.719 6.063,0.938 0.302,0.219 10 false IN 5.885,2.208 6.188,2.427 0.302,0.219 10 false IN 4.979,2.25 5.281,2.469 0.302,0.219 10 false EX 4.99,3.917 5.292,4.135 0.302,0.219 10 false EX 5.781,3.948 6.083,4.167 0.302,0.219 10 false IN 5.104,5.427 5.406,5.646 0.302,0.219 10 false EX 5.75,5.615 6.052,5.833 0.302,0.219 10 false IN 5.073,7.281 5.375,7.5 0.302,0.219 10 false EX 5.729,7.375 6.031,7.594 0.302,0.219 10 false IN 4.115,0.802 4.542,1.573 0.427,0.771 10 false Valve Lift 4.125,2.458 4.552,3.229 0.427,0.771 10 false Valve Lift 4.156,4.125 4.583,4.896 0.427,0.771 10 false Valve Lift 4.188,5.875 4.615,6.646 0.427,0.771 10 false Valve Lift 4.208,7.635 4.635,8.406 0.427,0.771 10 false Valve Lift 5.667,1.26 6.229,1.458 0.563,0.198 10 false 200° CA 4.948,1.552 6.365,1.865 1.417,0.313 10 false Valve Action Angle 5.479,2.969 6.563,3.146 1.083,0.177 10 false 150 or 240° CA 4.958,3.25 6.375,3.552 1.417,0.302 10 false Valve Action Angle 5.604,4.656 6.375,4.854 0.771,0.198 10 false 240° CA 4.938,4.948 6.354,5.25 1.417,0.302 10 false Valve Action Angle 5.479,6.375 6.583,6.604 1.104,0.229 10 false 106 or 280° CA 4.906,6.667 6.323,6.969 1.417,0.302 10 false Valve Action Angle 5.396,8.135 6.51,8.323 1.115,0.188 10 false 230 or 280° CA 4.938,8.448 6.354,8.75 1.417,0.302 10 false Valve Action Angle

Operation State Amount of Valve Lift/Valve Action Angle Objective Effect

*: During cranking, if the ECM determines that the engine has started, the intake valve action angle moves to 240°CA.

Upon Starting/Stopping Engine Intake valve action angle is fixed at 200°CA.* Reducing overlap to improve compression ratio Improved startability
At First Idling Intake valve action angle is fixed at 150 or 240°CA. Increasing overlap to increase internal EGR Improved emission control
Before Engine Warm-up (Except First Idling) Intake valve action angle is fixed at 240°CA. Improving intake air charging efficiency
·

Improved output

·

Better fuel economy


At Light and Medium Load (After Warmup)
·

Effects coordinated control with Dual VVT-i and ETCS-i.

·

Amount of intake valve lift is variable.

·

Intake valve action angle is variable within a range of 106 to 280° CA.


Closing the intake valve early to reduce pumping loss Better fuel economy
At Heavy Load (After Warm-up)
·

Effects coordinated control with Dual VVT-i.

·

Amount of intake valve lift is variable.

·

Intake valve action angle is variable within a range between 230 and 280° CA.


Closing the intake valve late, thus retarding the injection timing, to improve volumetric efficiency
·

Improved output

·

Better fueleconomy

·

Reduction of exhaust gas temperature