Home › Engine / Hybrid System › 3ZR-FAE ENGINE CONTROL › SFI SYSTEM › from 2015.04
NM3090E _51 Engine / Hybrid System _008644 3ZR-FAE ENGINE CONTROL _0048051 SFI SYSTEM DE DETAILS F

3ZR-FAE ENGINE CONTROL  SFI SYSTEM  DETAILS  VALVEMATIC ACTUATOR  


CONSTRUCTION


a.

The basic components of the continuously variable valve lift controller assembly are an EDU, a brushless motor and a differential roller converter.


b.

The internal gears of the continuously variable valve lift controller assembly are lubricated by engine oil.


c.

A neodymium magnet is used in a flat, brushless motor to achieve a compact size. The flat, brushless motor is a DC motor from which the brushes and the commutator have been eliminated. A multipolar magnetized magnet acts as a rotor, which switches the polarity of the voltage applied to the surrounding stator actuation coil in sync with the rotation of the rotor. The resulting alternating field and the rotor magnet magnaflux cause attraction and repulsion to generate torque.

HINT:

Neodymium magnet: A neodymium magnet is a type of rare earth magnet composed primarily of neodymium, iron and boron. The neodymium magnet has a high magnaflux density to provide an extremely strong magnetism.



d.

The EDU operates the motor in accordance with signals from the ECM. The differential roller converter converts the rotational movement of the motor into a linear movement. This linear movement operates the VALVEMATIC mechanism.

W127852C01
3.427,1.083 3.073,0.635 3.073,0.635 2.792,0.635 true 4.302,2.323 4.719,3.01 4.719,3.01 4.948,3.01 true 4.135,2.479 4.208,3.229 4.208,3.229 4.365,3.229 true 3.365,5.635 3.667,4.76 3.667,4.76 3.885,4.76 true 3.375,5.958 3.823,5.031 3.823,5.031 4.188,5.031 true 3.885,5.948 4.125,5.375 4.125,5.375 4.344,5.375 true 4.615,6.146 4.615,5.729 4.615,5.729 4.792,5.729 true 3.229,5.667 2.99,4.552 2.99,4.552 2.823,4.552 true 2.74,6.01 2.25,5.417 2.25,5.417 2.063,5.417 true 2.823,6.823 2.302,7.24 2.302,7.24 2.125,7.24 true 3.375,6.625 3.125,7.615 3.125,7.615 2.948,7.615 true 3.625,6.635 3.625,7.948 3.625,7.948 3.833,7.948 true 4.552,6.792 4.698,7.354 4.698,7.354 4.917,7.354 true 4.625,6.594 4.74,6.896 4.74,6.896 4.896,6.896 true 2.615,0.521 2.927,0.677 0.313,0.156 10 false *1 2.625,4.427 2.938,4.583 0.313,0.156 10 false *2 1.896,5.313 2.208,5.469 0.313,0.156 10 false *3 1.958,7.125 2.271,7.281 0.313,0.156 10 false *4 3.927,7.844 4.24,8 0.313,0.156 10 false *5 4.365,5.292 4.677,5.448 0.313,0.156 10 false *6 4.24,4.927 4.552,5.083 0.313,0.156 10 false *7 3.938,4.656 4.25,4.813 0.313,0.156 10 false *8 4.854,5.646 5.167,5.802 0.313,0.156 10 false *a 4.969,7.25 5.281,7.406 0.313,0.156 10 false *b 0.24,3.948 0.552,4.104 0.313,0.156 10 false *c 5.708,6.49 6.021,6.646 0.313,0.156 10 false *d 2.771,7.5 3.083,7.656 0.313,0.156 10 false *e 4.948,6.781 5.26,6.938 0.313,0.156 10 false *a 5.01,2.906 5.323,3.063 0.313,0.156 10 false *a 4.438,3.115 4.75,3.271 0.313,0.156 10 false *b 4.583,1.833 4.896,1.99 0.313,0.156 10 false *a 4.75,2 5.063,2.156 0.313,0.156 10 false *a
*1 Continuously Variable Valve Lift Controller Assembly *2 Motor Portion
*3 EDU *4 Sensor Portion
·

Motor Position Sensor

·

Action Angle Sensor


*5 Differential Roller Converter *6 Bearing
*7 Rotor/Motor *8 Stator
*a Engine Oil Out *b Engine Oil In
*c Continuously Variable Valve Lift Controller Assembly Cross Section *d Linear Movement
*e Rotational Movement - -



e.

The motor rotates the nut on the differential roller converter. The movement of the nut travels to the planetary unit (gear) and the planetary unit (screw) and causes the sun shaft to move linearly.

W111631C01
0.188,0.167 6.958,3.99 6.771,3.823 4.385,0.458 4.635,0.875 true 2.99,0.927 3.417,1.875 true 2.458,1.375 2.99,2.302 true 1.781,2.021 2.51,2.708 true 1.427,2.583 2.094,2.844 true 2.104,3.417 2.292,3.063 true 2.792,3.104 2.729,3.708 true 2.917,3.125 3.021,3.635 true 2.771,2.875 3.75,3.427 true 3.781,2.333 3.938,2.823 true 3.75,2.24 4.396,2.375 true 3.698,2.052 4.604,2.01 true 4.417,6.302 4.198,5.99 true 2,5.042 1.823,4.781 true 3.635,4.729 3.719,4.49 true 4.167,4.979 3.729,5.635 true 2.406,6.302 2.26,6.74 true 1.177,6.76 1.01,7.042 true 6.438,4.688 6.25,4.927 true 0.25,0.229 0.563,0.385 0.313,0.156 10 false *1 4.229,0.271 4.542,0.427 0.313,0.156 10 false *2 2.875,0.75 3.188,0.906 0.313,0.156 10 false *3 2.281,1.219 2.594,1.375 0.313,0.156 10 false *4 1.25,2.458 1.563,2.615 0.313,0.156 10 false *5 2.635,3.781 2.948,3.938 0.313,0.156 10 false *6 2.938,3.677 3.25,3.833 0.313,0.156 10 false *7 3.813,3.375 4.125,3.531 0.313,0.156 10 false *8 4.979,1.438 5.292,1.594 0.313,0.156 10 false *a 2.021,3.469 2.333,3.625 0.313,0.156 10 false *b 1.635,1.865 1.948,2.021 0.313,0.156 10 false *3 3.906,2.865 4.219,3.021 0.313,0.156 10 false *7 4.448,2.313 4.76,2.469 0.313,0.156 10 false *6 4.646,1.938 4.958,2.094 0.313,0.156 10 false *8 4.458,6.323 4.771,6.479 0.313,0.156 10 false *2 1.656,4.604 1.969,4.76 0.313,0.156 10 false *6 4.156,4.813 4.469,4.969 0.313,0.156 10 false *8 6.438,4.531 6.75,4.688 0.313,0.156 10 false *7 3.74,4.323 4.052,4.479 0.313,0.156 10 false *6 2.167,6.792 2.479,6.948 0.313,0.156 10 false *8 0.854,7.052 1.167,7.208 0.313,0.156 10 false *7
*1 Differential Roller Converter *2 Sun Shaft
*3 Planetary Unit (Gear) *4 Planetary Unit (Screw)
*5 Nut *6 Pinion
*7 Ring Gear *8 Sun Gear
*a Linear Movement *b Rotational Movement




OPERATION


a.

On the basic control, the ECM determines the target intake air volume in accordance with the accelerator pedal depressed angle, engine speed and various sensor signals. The EDU, which is integrated into the continuously variable valve lift controller assembly, determines the target amount of lift and the action angle of the intake valve in accordance with signals from the ECM.

W123602E01
0.104,0.063 3.771,0.26 3.667,0.198 10 false Basic Control Flow Chart 2.01,0.635 2.531,1.146 0.521,0.51 10 false Upon Starting 2.802,0.635 3.302,1.146 0.5,0.51 10 false At First Idling 3.688,0.635 4.281,1.167 0.594,0.531 10 false Before Warm-up 4.917,0.635 5.875,0.979 0.958,0.344 10 false After Warm-up 6.385,0.635 6.958,1.302 0.573,0.667 10 false Stopping Engine 4.656,1.031 5.156,1.688 0.5,0.656 10 false At Light Load 5.365,1.031 6.396,1.438 1.031,0.406 10 false At Heavy Load 0.531,2.125 1.563,2.531 1.031,0.406 10 false Starter Signal 0.531,2.656 1.563,3.063 1.031,0.406 10 false Engine Speed 0.073,3.24 0.896,4.01 0.823,0.771 10 false Intake Valve Action Angle (CA) 1.104,3.188 2.135,3.594 1.031,0.406 9 false 280 1.104,3.313 2.135,3.719 1.031,0.406 9 false 240 1.104,3.438 2.135,3.844 1.031,0.406 9 false 200 1.104,3.656 2.135,4.063 1.031,0.406 9 false 106 3,3.677 4.031,4.083 1.031,0.406 9 false 150 5.646,3.083 5.948,3.365 0.302,0.281 9 false 280 5.792,6.25 6.427,6.563 0.635,0.313 10 false Time 0.073,4.417 1.083,5.198 1.01,0.781 10 false Advanced Angle of Intake Valve (CA) 1.188,4.385 2.219,4.792 1.031,0.406 9 false 62 1.188,4.615 2.219,5.021 1.031,0.406 9 false 20 1.26,4.854 2.292,5.26 1.031,0.406 9 false 0 0.073,5.635 1.125,6.396 1.052,0.76 10 false Advanced Angle of Exhaust Valve (CA) 1.188,5.583 2.219,5.99 1.031,0.406 9 false 50 1.188,5.813 2.219,6.219 1.031,0.406 9 false 20 1.26,6.073 2.292,6.479 1.031,0.406 9 false 0


b.

To optimize the valve opening and closing timing, the VALVEMATIC effects coordinate control with the Dual VVT-i. Thus, the VALVEMATIC controls the amount of valve lift and the action angle in accordance with the driving conditions. Because the VALVEMATIC features timing advance characteristics in which the amount of valve lift and the action angle vary, it effects the proper control to attain the intended amount of valve lift. This VVT-i has timing advance characteristics that differ from the conventional Dual VVT-i control.

W100449E05
3.927,1.292 4.427,0.781 4.427,0.781 4.688,0.781 true 4.25,1.823 4.49,2.073 4.49,2.073 4.667,2.073 true 0.135,0.063 2.448,0.479 2.313,0.417 10 false VALVEMATIC Operating Range 1.917,0.99 2.656,1.646 0.74,0.656 10 false Amount of Valve Lift 3,0.26 3.615,0.927 0.615,0.667 10 false Exhaust Valve 3.698,0.26 4.188,0.885 0.49,0.625 10 false Intake Valve 4.76,0.708 6.49,1.448 1.729,0.74 10 false Amount of Intake Valve Lift (1.1 mm to 11.5 mm) 3.052,1.885 4.24,2.292 1.188,0.406 10 false Valve Action Angle 4.729,1.99 6.344,2.552 1.615,0.563 10 false Intake Valve Action Angle (106° CA to 280° CA)

W100450E04
0.167,0.063 2.74,0.469 2.573,0.406 10 Valve Opening and Closing Graph 3,0.302 3.615,0.927 0.615,0.625 10 Exhaust Valve 3.781,0.313 4.271,0.938 0.49,0.625 10 Intake Valve 1.958,1.01 2.667,1.667 0.708,0.656 10 Amount of Valve Lift 0.74,1.885 6.135,2.604 5.396,0.719 10 The timing to open the intake valve is adjusted in accordance with the timing to close the exhaust valve. Thus, by closing the intake valve early, fuel economy is improved.

W127106E01
3.656,1.302 3.25,0.542 3.25,0.542 2.938,0.542 true 4.313,1.438 4.531,0.833 4.531,0.833 4.906,0.833 true 4.344,1.802 4.74,1.615 4.74,1.615 5.094,1.615 true 4.333,2.25 4.573,2.396 4.573,2.396 5,2.396 true 3.896,2.042 4.656,2.76 4.656,2.76 4.979,2.76 true 3,2.583 2.729,2.865 2.729,2.865 2.51,2.865 true 0.146,0.063 3.99,0.458 3.844,0.396 10 false Relationship between Intake Valve Action Angle and VVT-i 4.958,0.771 6.115,1.073 1.156,0.302 10 false Before Warm-up 1.26,1.615 2.531,2.26 1.271,0.646 10 false Intake Valve Action Angle (CA) 2.698,0.969 2.99,1.188 0.292,0.219 10 false 280 2.698,1.385 2.99,1.604 0.292,0.219 10 false 240 2.688,1.729 2.979,1.948 0.292,0.219 10 false 200 2.688,2.083 2.979,2.302 0.292,0.219 10 false 160 2.698,2.49 2.99,2.708 0.292,0.219 10 false 106 2.948,2.615 3.24,2.833 0.292,0.219 10 false 62 3.26,2.615 3.552,2.833 0.292,0.219 10 false 40 3.76,2.615 4.052,2.833 0.292,0.219 10 false 20 4.281,2.615 4.573,2.833 0.292,0.219 10 false 0 4.625,2.125 4.917,2.344 0.292,0.219 10 false 150 5.156,1.552 7.104,2.208 1.948,0.656 10 false Upon Starting and Engine Stopping 5.052,2.323 6.208,2.625 1.156,0.302 10 false First Idling 5.021,2.688 6.177,2.99 1.156,0.302 10 false Engine Stopped 1.885,0.469 2.906,0.76 1.021,0.292 10 false After Warm-up 1.896,2.76 2.573,3.031 0.677,0.271 10 false At Idling 3.073,2.896 4.406,3.563 1.333,0.667 10 false Advanced Angle of Intake Valve (CA)


c.

The following table shows the coordinate control of the VALVEMATIC with ETCS-i during basic control:

Control Operation
Starting Control VALVEMATIC controls the intake valve action angle, and ETCS-i operates the throttle valve to control the intake air volume.
First Idle Control
Before Warm-up Control
After Warm-up Control
·

VALVEMATIC controls the amount of intake valve lift and the intake valve timing, and ETCS-i opens the throttle valve wider than the normal opening and reduces the intake manifold negative pressure in order to minimize pumping loss.

·

During idling, when the intake air volume is small, the ETCS-i controls the intake air volume as in the past.


Engine Stop Control