Home › Drivetrain › K114F MULTIDRIVE / CVT › CVT SYSTEM › 2015.04–2015.10
NM3090E _52 Drivetrain _036369 K114F MULTIDRIVE / CVT _0168295 CVT SYSTEM GE GENERAL F

K114F MULTIDRIVE / CVT  CVT SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A K114F Continuously Variable Transaxle (CVT) is used on AWD models with 3ZR-FAE engine.


b.

A coaxial 2 discharge port oil pump system is used.


c.

An electric CVT oil pump (oil pump with motor assembly) is provided to ensure adequate CVT oil pressure when the stop and start system is operating. For details, refer to IDLING STOP CONTROL.


d.

A CVT fluid warmer is used in the CVT fluid cooling system.


e.

A gate type shift lever is used.


f.

A 7-speed sport sequential shiftmatic system is used.


g.

A shift paddle is used on Middle or High grade.


h.

A shift pattern select system is used to select the driving mode (Normal and Sport). In Sport mode, a higher level of responsiveness and a linear acceleration feel have been achieved.



SPECIFICATION


CVT Assembly
Shift Mechanism Type Pulley and Steel Belt
Forward/Reverse Switching Mechanism Single Pinion Type Planetary Gear
Pulley Ratio Forward 2.517 to 0.390
Reverse 1.751
Final Gear Ratio 5.791
Fluid Type Toyota Genuine CVT Fluid FE
Fluid Capacity*1 7.1 Liters (7.5 US qts, 6.2 Imp. qts)
Weight (Reference)*2 95.0 kg (209.4 lb)

HINT:

*1: Differential included.

*2: The weight shown is when the transaxle is filled with fluid.


Friction Discs and Gears
Planetary Gear No. of Sun Gear Teeth 71
No. of Pinion Gear Teeth 16
No. of Ring Gear Teeth 102
Reduction Gear No. of Drive Gear Teeth 26
No. of Driven Gear Teeth 40
Final Gear No. of Drive Gear Teeth 17
No. of Driven Gear Teeth 64
Forward Clutch No. of Discs 3
Reverse Brake No. of Discs 3

Torque Converter Assembly
Torque Converter Type 3-element, 1-step, 2-phase
Stall Torque Ratio 2.03


PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section:

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch Off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)