Home › Engine / Hybrid System › 3ZR-FAE STOP AND START › STOP AND START SYSTEM › 2015.04–2015.10
NM3090E _51 Engine / Hybrid System _036990 3ZR-FAE STOP AND START _0171073 STOP AND START SYSTEM CO CONTROL F

3ZR-FAE STOP AND START  STOP AND START SYSTEM  CONTROL  ELECTRIC OIL PUMP FOR CVT CONTROL  


SYSTEM CONTROL


a.

Because the engine stop and start ECU operates the electric oil pump for CVT during idle stop, a stable CVT oil pressure is ensured, enabling a smooth vehicle start.

W117272E01
0.719,1.219 1.177,1.417 0.458,0.198 10 false ECM 1.823,1.417 2.688,1.667 0.865,0.25 10 false CAN (V Bus) 5.646,0.167 6.76,0.531 1.115,0.365 10 false Electric Oil Pump for CVT 5.708,1.344 6.708,1.792 1,0.448 10 false Oil Pump Motor Driver 3.271,1.354 3.885,1.896 0.615,0.542 10 false Backup Boost Converter 3.115,0.25 4.042,0.75 0.927,0.5 10 false Engine Stop and Start ECU 4.281,0.948 5.417,1.521 1.135,0.573 10 false Electric Oil Pump for CVT Rotation Frequency 4.229,1.865 5.458,2.49 1.229,0.625 10 false Electric Oil Pump for CVT Operation Signal (Duty Signal)


b.

Electric oil pump for CVT operation control actuates the electric oil pump for CVT when it receives an engine stop signal and the following condition is met. The electric oil pump for CVT will stop operating when the engine automatically starts and the engine speed exceeds a specified value.

Electric Oil Pump for CVT Operation

○: Operating

-: Idle stop is disabled

Shift Position P R N D M
Brake On (applied) - - - ○ ○
Brake Off (not applied) - - - - -

Electric Oil Pump for CVT Operating Condition
Item Condition Remarks
CVT Oil Temperature 25°C to 111°C (77°F to 231.8°F) Detected from the oil temperature sensor in the CVT