Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM › 2015.04–2015.10
NM3090E _58 Vehicle Interior _008903 THEFT DETERRENT / KEYLESS ENTRY _0058436 ENTRY AND START SYSTEM GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The entry and start system has the following main functions, making it a very user-friendly system:

Function Outline
Start Function The start function is operated by simply pressing the engine switch while carrying the electrical key transmitter sub-assembly. When the engine switch is pressed, the certification ECU turns on/off the ACC relay, IG1 relay and IG2 relay to switch the power source pattern.
·

The power source mode changes depending on the depression of the brake pedal*1 or clutch pedal*2 and the shift lever position*1.


Immobiliser The immobiliser function compares the ID code registered in the certification ECU*3 or ID code box*4 with the ID code of the transponder chip embedded in the electrical key transmitter sub-assembly.
Steering Lock The steering lock function is operated to lock and unlock the steering wheel by using a lock/unlock motor in the steering column assembly.
Entry Function Entry Unlock:
·

All doors are unlocked by grabbing the front outside door handle assembly.


Entry Lock:
·

Touching the lock sensor of the front outside door handle assembly or the lock switch of the back door will cause all doors to lock.


Entry Back Door Open The entry back door open can be operated manually by simply pressing the back door opener switch.
Wireless Door Lock Control The wireless door lock control function is a convenient system for locking and unlocking all the doors and the back door at a distance. The basic operation is the same as that of the wireless door lock control system.

*1: Models with automatic transaxle or CVT

*2: Models with manual transaxle

*3: Models without ID code box

*4: Models with ID code box