Home › Drivetrain › K114F MULTIDRIVE / CVT › CVT SYSTEM › from 2015.04
NM3090E _52 Drivetrain _036369 K114F MULTIDRIVE / CVT _0168295 CVT SYSTEM DE DETAILS F

K114F MULTIDRIVE / CVT  CVT SYSTEM  DETAILS  DIFFERENTIAL PRE-TORQUE MECHANISM  


CONSTRUCTION


a.

A differential pre-torque mechanism, in which the conical spring is located between the side gear and the side gear washer, is used.


b.

The load of the conical spring applies a friction force to the sliding area, improving straightline stability and steering stability.


c.

Under light load and low differential rotation speeds, due to the friction force of the sliding area, the differential limit torque for the left and right wheels is achieved within the range of the conical spring allowable load. At middle and high load ranges, which are beyond the allowable load of the conical spring, the system performs as an open differential.

X117393C02
4.5,1.5 5,1.333 true 5,1.667 5.427,1.167 true 5.917,1.667 5.5,1.083 true 6,0.75 6.333,0.5 true 4.354,1.438 4.604,1.688 0.25,0.25 10 false *1 4.865,1.656 5.115,1.906 0.25,0.25 10 false *2 6.323,0.365 6.573,0.615 0.25,0.25 10 false *4 4.333,0.344 4.583,0.594 0.25,0.25 10 false *a 4.333,2.021 4.583,2.271 0.25,0.25 10 false *b 5.906,1.667 6.156,1.917 0.25,0.25 10 false *3
*1 Side Gear *2 Conical Spring
*3 Side Gear Washer *4 Differential Case
*a Light Load Range *b Middle and High Load Range


Relationship Diagram between Ring Gear Torque and Differential Limit Torque
X117332E03
1.302,1.479 2.313,1.958 1.01,0.479 10 false Differential Limit Torque 3.198,2.323 4.458,2.594 1.26,0.271 10 false Ring Gear Torque 5.438,0.365 6.698,0.635 1.26,0.271 10 false : With mechanism 5.438,0.729 6.99,1 1.552,0.271 10 false : Without mechanism