Home › Engine / Hybrid System › 2WW ENGINE CONTROL › ECD SYSTEM › 2015.10–2016.08
NM3090E _51 Engine / Hybrid System _043813 2WW ENGINE CONTROL _0205037 ECD SYSTEM CO CONTROL F

2WW ENGINE CONTROL  ECD SYSTEM  CONTROL  COOLING FAN CONTROL  


FUNCTION


a.

Cooling fan operation is controlled to achieve an optimal fan speed in accordance with the engine coolant temperature, vehicle speed, engine speed and air conditioning operating conditions.


b.

The ECM activates the cooling fan relay to control the cooling fan in accordance with the engine coolant temperature, air conditioning condition, engine speed and vehicle speed.


c.

The cooling fan speed is controlled in 2 stages: low speed (series connection) and high speed (parallel connection).


d.

After the engine is stopped (the ignition switch is off*1 or the engine switch is off*2), the ECM operates the cooling fan at low speed for a maximum of 380 seconds according to the driving conditions and engine condition to lower the temperature inside the engine compartment.

*1: Models without entry and start system

*2: Models with entry and start system


W127842E03
1.917,3.594 2.604,3.594 true 5.854,1.969 6.698,2.792 0.844,0.823 10 false No. 1 Cooling Fan Relay 2.948,0.896 3.792,1.604 0.844,0.708 10 false No. 3 Cooling Fan Relay 3.271,1.792 4.125,2.365 0.854,0.573 10 false No. 2 Cooling Fan Motor 3.094,2.354 3.948,2.927 0.854,0.573 10 false No. 2 Cooling Fan Relay 4.292,3.615 5.146,4.188 0.854,0.573 10 false No. 1 Cooling Fan Motor 2.49,2.208 2.99,2.604 0.5,0.396 10 false ECM 0.927,1.771 1.885,2.365 0.958,0.594 10 false Engine Coolant Temperature 0.927,2.313 1.865,2.646 0.938,0.333 10 false Engine Speed 0.917,2.896 1.854,3.229 0.938,0.333 10 false Vehicle Speed 0.781,3.375 1.896,4.156 1.115,0.781 10 false CAN (V1 Bus)*1 or CAN (V Bus)*2 2.167,3.76 3.156,4.292 0.99,0.531 10 false Air Conditioning Amplifier 0.24,4.479 2.646,4.76 2.406,0.281 10 false *1: Models with central gateway ECU 2.927,4.469 5.927,4.771 3,0.302 10 false *2: Models without central gateway ECU