Home › Engine / Hybrid System › 2WW ENGINE CONTROL › ECD SYSTEM › from 2015.10
NM3090E _51 Engine / Hybrid System _043813 2WW ENGINE CONTROL _0205037 ECD SYSTEM CO CONTROL F

2WW ENGINE CONTROL  ECD SYSTEM  CONTROL  FUEL INJECTION CONTROL  


FUNCTION


a.

Based on information from various sensors, the ECM determines the injection timing and injection volume according to the engine condition, operates the fuel injectors and controls the fuel injection.

W113859E05
1.677,2.219 2.135,2.417 0.458,0.198 10 false ECM 1.333,5.177 2.677,5.385 1.344,0.208 10 false Injector Assembly 0.198,5.49 2.542,5.823 2.344,0.333 10 false *: Models with air conditioning system 4.198,0.333 6.375,0.573 2.177,0.24 10 false Accelerator Pedal Position Sensor 4.188,0.667 5.927,0.906 1.74,0.24 10 false Crankshaft Position Sensor 4.188,1 5.938,1.25 1.75,0.25 10 false Camshaft Position Sensor 4.188,1.344 6.5,1.583 2.313,0.24 10 false Engine Coolant Temperature Sensor 4.188,1.708 5.99,1.927 1.802,0.219 10 false Fuel Temperature Sensor 4.198,2.031 6.917,2.354 2.719,0.323 10 false Intake Mass Air Flow Meter Sub-assembly 4.167,2.375 6.188,2.573 2.021,0.198 10 false Intake Air Temperature Sensor 4.177,2.656 6.292,3.229 2.115,0.573 10 false Intake Air Temperature Sensor (for Compressed Intake Air) 4.208,3.438 6.479,3.708 2.271,0.271 10 false Turbo Pressure Sensor Assembly 4.219,3.76 5.75,4 1.531,0.24 10 false Air Fuel Ratio Sensor 4.208,4.125 5.052,4.344 0.844,0.219 10 false Start Signal 4.219,4.458 5.802,4.719 1.583,0.26 10 false Air Conditioning Signal*


b.

The types of fuel injection are as follows:

Fuel Injection Type Purpose
Pre-injection Reduces combustion noise by gradually starting fuel combustion for the main injection.
Main Injection Optimizes combustion by using optimal fuel injection.
Post-injection
·

Activates the oxidation catalyst.

·

Regenerates the Diesel Particulate Filter (DPF) catalyst.



W112449C01
0.708,0.083 0.885,0.25 0.177,0.167 10 false *a 6.5,3.198 6.677,3.375 0.177,0.177 10 false *b 1.573,3.354 1.781,3.531 0.208,0.177 10 false *c 3.167,3.344 3.479,3.5 0.313,0.156 10 false *d 5.281,3.344 5.594,3.5 0.313,0.156 10 false *e 1.385,1.573 1.542,1.75 0.156,0.177 10 true *f 3.063,1.031 3.229,1.229 0.167,0.198 10 true *g 4.24,0.615 4.406,0.792 0.167,0.177 10 true *h
*a Nozzle Needle Stroke (mm) *b Time (ms)
*c Pre-injection *d Main Injection
*e Post-injection *f Acoustic Optimization
*g Combustion Optimization *h Exhaust Re-treatment


HINT:

When replacing the following parts, it is necessary to reset the learned values of the ECM. For details of the reset procedure, refer to the Repair Manual.

·

Intake Mass Air Flow Meter Sub-assembly

·

Injector Assembly

·

Fuel Pressure Sensor