Home › Engine / Hybrid System › 2WW ENGINE MECHANICAL › ENGINE UNIT › from 2015.10
NM3090E _51 Engine / Hybrid System _043814 2WW ENGINE MECHANICAL _0205040 ENGINE UNIT DE DETAILS F

2WW ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CYLINDER HEAD  


CONSTRUCTION


a.

A cylinder head made of aluminum alloy (AlSi7MgCu0.5) is used.


b.

A camshaft housing sub-assembly is located in the cylinder head sub-assembly. The camshafts are supported in their own camshaft housing sub-assembly. The camshaft housing sub-assembly is made from the aluminum-silicon alloy (AlSi9Cu3(Fe)).

W112470C01
1.094,2.208 5.813,5.667 4.719,3.458 1.896,1.021 1.563,0.646 1.563,0.646 1.281,0.646 true 2.323,3.823 1.823,3.271 1.823,3.271 1.635,3.271 true 2.292,4.01 1.74,3.771 1.74,3.771 1.531,3.771 true 2.333,4.177 1.792,4.073 1.792,4.073 1.542,4.073 true 2.375,4.396 1.823,4.292 1.823,4.292 1.573,4.292 true 2.74,4.479 2.083,4.667 2.083,4.667 1.802,4.667 true 2.854,4.615 2.292,5.302 2.292,5.302 2.052,5.302 true 3.323,4.906 3.719,5.448 3.719,5.448 3.885,5.448 true 3.969,3.875 4.365,3.458 4.365,3.458 4.542,3.458 true 2.969,5 2.729,5.458 2.729,5.458 2.51,5.458 true 2.302,4.792 2,4.885 2,4.885 1.792,4.885 true 4.167,4.208 4.594,3.875 4.594,3.875 4.938,3.875 true 3.281,3.615 3.75,2.625 3.75,2.625 4.031,2.625 true 1.094,0.542 1.323,0.844 0.229,0.302 10 false *1 1.438,3.167 1.667,3.469 0.229,0.302 10 false *2 1.344,3.677 1.573,3.979 0.229,0.302 10 false *3 1.365,3.979 1.594,4.281 0.229,0.302 10 false *4 1.396,4.198 1.625,4.5 0.229,0.302 10 false *5 1.625,4.563 1.792,4.792 0.167,0.229 10 false *6 1.854,5.198 2.042,5.479 0.188,0.281 10 false *7 3.927,5.344 4.156,5.646 0.229,0.302 10 false *9 4.583,3.344 4.938,3.646 0.354,0.302 10 false *10 4.073,2.5 4.427,2.802 0.354,0.302 10 false *11 1.156,2.25 1.51,2.552 0.354,0.302 10 false *a 1.615,4.792 1.844,5.073 0.229,0.281 10 false *b 4.99,3.76 5.344,4.063 0.354,0.302 10 false *c 2.323,5.365 2.552,5.667 0.229,0.302 10 false *8
*1 Cylinder Head *2 No. 2 Camshaft (Exhaust Camshaft)
*3 Camshaft Housing Sub-assembly *4 Valve Rocker Arm Sub-assembly
*5 Valve Lash Adjuster Assembly *6 Valve Spring
*7 Valve Guide Bushing *8 Exhaust Valve
*9 Intake Valve *10 Glow Plug Assembly
*11 Camshaft (Intake Camshaft) - -
*a Cross-section *b Exhaust Port
*c Intake Port - -



c.

This engine has 4 valves per cylinder. By using a 4-valve cylinder head, the injector can be positioned in the center of the cylinder. As a result, high output and low exhaust emissions have been achieved.


d.

This engine forms a flat combustion chamber roof. The intake and exhaust valves are arranged parallel to each other.


e.

A distinction is made between the intake ports of the swirl port and tangential port, which provides for optimum mixture preparation and cylinder charge. The swirl and tangential ports are already separated in the intake manifold and are routed separately from each other in the cylinder head. The exhaust ports for each cylinder are already joined in the cylinder head so that only one exhaust port feeds into the exhaust manifold. The swirl port generates a swirl in the cylinder and the tangential port maintains the optimal cylinder charge.

W112471C01
3.198,2.427 2.802,2.802 2.802,2.802 2.594,2.802 true 3.844,2.396 4.24,2.771 4.24,2.771 4.448,2.771 true 4.542,1.896 4.74,2.26 4.74,2.26 4.99,2.26 true 4.219,1.344 4.396,0.688 4.396,0.688 4.563,0.688 true 4.875,1.167 5.198,1.302 5.198,1.302 5.396,1.302 true 3.875,0.573 4.01,0.25 4.01,0.25 4.146,0.25 true 2.563,1.708 2.375,1.333 2.375,1.333 2.188,1.333 true 2.552,2.021 2.365,2.396 2.365,2.396 2.167,2.396 true 4.479,2.677 4.708,2.979 0.229,0.302 10 false *2 5.438,1.208 5.667,1.51 0.229,0.302 10 false *3 4.198,0.156 4.427,0.458 0.229,0.302 10 false *4 5.042,2.156 5.396,2.458 0.354,0.302 10 false *b 2,1.229 2.208,1.458 0.208,0.229 10 false *a 1.979,2.292 2.208,2.552 0.229,0.26 10 false *a 4.583,0.573 4.885,0.875 0.302,0.302 10 false *c 2.406,2.708 2.635,3.01 0.229,0.302 10 false *1
*1 Exhaust Valve *2 Intake Valve
*3 Glow Plug Assembly *4 Injector Assembly
*a Exhaust Port *b Tangential Port
*c Swirl Port - -



f.

This engine uses a cylinder head with cross-flow cooling, where the coolant flows from the hot exhaust side to the cool intake side. This has the advantage of providing uniform heat distribution in the overall cylinder head. It also prevents additional pressure losses in the cooling circuit.