Home › Engine / Hybrid System › 2WW ENGINE MECHANICAL › ENGINE UNIT › from 2015.10
NM3090E _51 Engine / Hybrid System _043814 2WW ENGINE MECHANICAL _0205040 ENGINE UNIT DE DETAILS F

2WW ENGINE MECHANICAL  ENGINE UNIT  DETAILS  PISTON  


CONSTRUCTION


a.

A piston provided with a combustion chamber is used.


b.

The piston is made of aluminum-silicon alloy.


c.

A cooling channel has been provided to reduce the piston temperature and achieve high reliability.


d.

The top ring groove uses a cast-in ring carrier to improve wear resistance.


e.

A graphite (graphal procedure) coating is applied to the piston skirt portion in order to achieve friction loss reduction.


f.

The top inner edge of the No. 1 compression ring is chamfered. The outer surface of the No. 1 compression ring is polished and slightly crowned. The No. 1 compression ring has a chrome ceramic layer for low wear.


g.

The No. 2 compression ring has a sharp lower edge which gives the ring an oil-stripping effect.


h.

The running surface of the oil ring is chromium-coated.

W112483C01
1.625,1.875 1.333,2.625 1.333,2.625 1.115,2.625 true 1.125,1.146 0.854,0.823 0.854,0.823 0.656,0.823 true 1.125,1.344 0.854,1.021 0.854,1.021 0.656,1.021 true 1.125,1.469 0.854,1.688 0.854,1.688 0.656,1.688 true 1.094,2.021 0.823,2.24 0.823,2.24 0.625,2.24 true 1.094,0.667 0.979,0.479 0.979,0.479 0.792,0.479 true 2.76,1.104 2.917,1.302 2.917,1.302 3.104,1.302 true 2.365,1.25 2.656,1.563 2.656,1.563 3.115,1.563 true 2.104,0.792 2.271,0.427 2.271,0.427 2.448,0.427 true 4.5,0.958 4.729,1.26 0.229,0.302 10 false *2 4.5,1.531 4.729,1.833 0.229,0.302 10 false *3 4.5,2.052 4.729,2.354 0.229,0.302 10 false *4 0.604,0.375 0.833,0.677 0.229,0.302 10 false *1 0.479,0.719 0.677,0.979 0.198,0.26 10 false *2 0.469,0.917 0.688,1.177 0.219,0.26 10 false *3 0.458,1.594 0.688,1.896 0.229,0.302 10 false *4 0.896,2.521 1.125,2.708 0.229,0.188 10 false *5 0.438,2.135 0.667,2.438 0.229,0.302 10 false *a 3.146,1.458 3.375,1.646 0.229,0.188 10 false *b 3.125,1.188 3.354,1.365 0.229,0.177 10 false *c 2.479,0.313 2.708,0.49 0.229,0.177 10 false *d
*1 Piston *2 No. 1 Compression Ring
*3 No. 2 Compression Ring *4 Oil Ring
*5 Piston Pin - -
*a Piston Skirt *b Cooling Channel
*c Top Ring Groove *d Combustion Chamber



i.

The piston is cooled by the engine oil injected by the No. 1 oil nozzle sub-assembly

W112484C01
2.969,1.198 2.667,1.948 2.667,1.948 2.448,1.948 true 2.75,0.354 2.635,0.167 2.635,0.167 2.448,0.167 true 4.177,0.958 4.458,1.271 4.458,1.271 4.917,1.271 true 4.646,2.313 4.802,1.948 4.802,1.948 4.99,1.948 true 2.26,0.083 2.49,0.385 0.229,0.302 10 false *1 2.25,1.854 2.479,2.042 0.229,0.188 10 false *a 4.958,1.177 5.188,1.354 0.229,0.177 10 false *b 5.031,1.854 5.26,2.031 0.229,0.177 10 false *2
*1 Piston *2 No. 1 Oil Nozzle Sub-assembly
*a Drain Bore *b Cooling Channel
V100135

Engine Oil - -