Home › Engine / Hybrid System › 2WW ENGINE MECHANICAL › ENGINE UNIT › from 2015.10
NM3090E _51 Engine / Hybrid System _043814 2WW ENGINE MECHANICAL _0205040 ENGINE UNIT DE DETAILS F

2WW ENGINE MECHANICAL  ENGINE UNIT  DETAILS  TIMING CHAIN AND CHAIN TENSIONER  


CONSUTRUCTION


a.

Simple sleeve-type chains are used for all chains. On a sleeve-type chain, the tooth flanks of the sprocket always touch the fixed sleeves at the same point. It is therefore particularly important for such chain drives to be correctly lubricated. While having the same pitch and breaking force, sleeve-type chains have a larger link surface than the equivalent roller-type chains. A larger link surface delivers a lower link surface contact pressure and thus less wear in the links.


b.

The timing chain is lubricated by the oil No. 2 oil nozzle sub-assembly.


c.

The chain tensioners use an oil pressure to maintain proper chain tension at all times. The chain tensioner suppresses noise generated by the chain. The oil in the chain tensioner achieves directional damping by means of a non-return valve.

W112488C01
1.719,0.417 1.604,0.229 1.604,0.229 1.469,0.229 true 1.521,0.677 1.406,0.49 1.406,0.49 1.271,0.49 true 1.188,1.948 0.958,2.125 0.958,2.125 0.865,2.125 true 5.365,1.375 5.271,0.948 5.271,0.948 5.156,0.948 true 5.896,1.313 5.958,0.885 5.958,0.885 6.042,0.885 true 1.896,1.271 2.438,1.479 2.438,1.479 2.688,1.479 true 2.26,2.24 2.365,2.115 2.365,2.115 2.479,2.115 true 2.542,1.177 2.646,1.052 2.646,1.052 2.76,1.052 true 2.646,0.49 2.75,0.354 2.75,0.354 2.865,0.354 true 2.198,0.479 2.302,0.24 2.302,0.24 2.417,0.24 true 1.948,0.313 2.031,0.125 2.031,0.125 2.125,0.125 true 2.24,1.833 2.344,1.698 2.344,1.698 2.448,1.698 true 1.146,1.688 1.031,1.5 1.031,1.5 0.896,1.5 true 2,2.854 1.781,3.135 1.781,3.135 1.688,3.135 true 1.531,2 1.208,2.375 1.208,2.375 1.073,2.375 true 1.604,2.375 1.271,2.76 1.271,2.76 1.135,2.76 true 2.333,3.292 2.521,3.156 2.521,3.156 2.729,3.156 true 1.99,3.229 1.906,3.375 1.906,3.375 1.802,3.375 true 5.333,2.688 5.229,3.115 5.229,3.115 5.115,3.115 true 5.854,2.604 5.927,3.031 5.927,3.031 6.01,3.031 true 1.292,0.135 1.479,0.365 0.188,0.229 10 false *1 2.146,0.031 2.448,0.208 0.302,0.177 10 false *16 1.042,0.417 1.271,0.594 0.229,0.177 10 false *2 0.708,1.406 0.885,1.625 0.177,0.219 10 false *3 0.698,2.021 0.927,2.198 0.229,0.177 10 false *4 0.896,2.281 1.083,2.521 0.188,0.24 10 false *5 0.969,2.667 1.156,2.854 0.188,0.188 10 false *6 1.51,3.031 1.74,3.208 0.229,0.177 10 false *7 1.615,3.281 1.844,3.458 0.229,0.177 10 false *8 2.76,3.063 2.99,3.24 0.229,0.177 10 false *9 4.917,0.844 5.156,1.052 0.24,0.208 10 false *17 4.865,3.01 5.135,3.24 0.271,0.229 10 false *17 6.073,0.771 6.375,0.948 0.302,0.177 10 false *18 6.042,2.938 6.344,3.115 0.302,0.177 10 false *18 2.51,2.01 2.74,2.188 0.229,0.177 10 false *10 2.479,1.604 2.708,1.781 0.229,0.177 10 false *11 2.708,1.385 2.948,1.594 0.24,0.208 10 false *12 2.792,0.948 3.021,1.125 0.229,0.177 10 false *13 2.906,0.26 3.135,0.438 0.229,0.177 10 false *14 2.448,0.146 2.677,0.323 0.229,0.177 10 false *15
*1 No. 1 Chain Sub-assembly (No. 1 Timing Chain) *2 No. 1 Chain Damper
*3 Supply Pump Drive Sprocket *4 No. 2 Chain Sub-assembly (No. 2 Timing Chain)
*5 No. 2 Oil Nozzle Sub-assembly *6 No. 2 Chain Damper
*7 Crankshaft *8 Oil Pump Drive Chain Sub-assembly
*9 Oil Pump Sprocket *10 No. 2 Chain Slipper
*11 No. 2 Chain Tensioner *12 No. 1 Chain Slipper
*13 No. 1 Chain Tensioner *14 No. 2 Camshaft Timing Gear
*15 Camshaft Timing Gear *16 Camshaft Timing Sprocket
*17 Outer Link with Pin *18 Inner Link with Pressed-in Sleeves