Home › Engine / Hybrid System › 2WW ENGINE MECHANICAL › ENGINE UNIT › from 2015.10
NM3090E _51 Engine / Hybrid System _043814 2WW ENGINE MECHANICAL _0205040 ENGINE UNIT GE GENERAL F

2WW ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 2WW engine is an in-line 4-cylinder, 2.0-liter, 16-valve DOHC turbocharged diesel engine with intercooler.


b.

This engine uses a direct injection system and common-rail system to achieve higher performance, clean emissions, low noise and low vibrations.



SPECIFICATION


a.

Engine Specifications

No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain and Gear Drive
Combustion Chamber Direct Injection Type
Manifolds Cross-flow
Fuel System Common-rail Type
Displacement 1995 cm3 (121.7 cu. in.)
Bore x Stroke 84.0 mm x 90.0 mm (3.31 in. x 3.54 in.)
Compression Ratio 16.5 : 1
Max. Output (EEC) 105 kW @ 4000 rpm
Max. Torque (EEC) 320 N*m @ 1750 rpm
Valve Timing Intake Open 8° BTDC
Closed 27.1° ABDC
Exhaust Open 29.3° BBDC
Closed 3.9° ATDC
Firing Order 1 - 3 - 4 - 2
Fuel Cetane Number 48 or higher
Emission Regulation EURO 6