Home › Drivetrain › K111F MULTIDRIVE / CVT › CVT SYSTEM › from 2015.10
NM3090E _52 Drivetrain _008831 K111F MULTIDRIVE / CVT _0054894 CVT SYSTEM GE GENERAL F

K111F MULTIDRIVE / CVT  CVT SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A K111F Continuously Variable Transaxle (CVT) is used.


b.

A CVT fluid warmer is used in the CVT fluid cooling system.


c.

A gate type shift lever is used.


d.

A 7-speed sport sequential shiftmatic system is used.


e.

A shift pattern select system is used to select the driving mode (Normal and Sport). In Sport mode, a higher level of responsiveness and a linear acceleration feel have been achieved.



SPECIFICATION


CVT Assembly
Shift Mechanism Type Pulley and Steel Belt
Forward/Reverse Switching Mechanism Single Pinion Type Planetary Gear
Pulley Ratio Forward 2.396 to 0.428
Reverse 1.668
Final Gear Ratio 5.791
Fluid Type Toyota Genuine CVT Fluid FE
Fluid Capacity*1 8.9 Litters (9.4 US qts, 7.8 Imp. qts)
Weight (Reference)*2 96 kg (211.6 lb)

HINT:

*1: Differential included.

*2: The weight shown is when the transaxle is filled with fluid.


Friction Discs and Gears
Planetary Gear No. of Sun Gear Teeth 71
No. of Pinion Gear Teeth 16
No. of Ring Gear Teeth 102
Reduction Gear No. of Drive Gear Teeth 26
No. of Driven Gear Teeth 40
Final Gear No. of Drive Gear Teeth 17
No. of Driven Gear Teeth 64
Forward Clutch No. of Discs 3
Reverse Brake No. of Discs 3

Torque Converter Assembly
Torque Converter Type 3-element, 1-step, 2-phase
Stall Torque Ratio 1.900