Home › Drivetrain › K114F MULTIDRIVE / CVT › CVT SYSTEM › from 2015.10
NM3090E _52 Drivetrain _036369 K114F MULTIDRIVE / CVT _0168295 CVT SYSTEM GE GENERAL F

K114F MULTIDRIVE / CVT  CVT SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A K114F Continuously Variable Transaxle (CVT) is used.


b.

A gate type shift lever is used.


c.

A 7-speed sport sequential shiftmatic system is used.


d.

A shift paddle is provided on specified models


e.

A shift pattern select system is used to select the driving mode (Normal and Sport). In Sport mode, a higher level of responsiveness and a linear acceleration feel have been achieved.


f.

A CVT fluid warmer is used in the CVT fluid cooling system.


g.

A coaxial 2 discharge port oil pump system is used.


h.

An electric oil pump is positioned parallel to the hydraulic circuit of the mechanical oil pump to ensure the oil pressure in order to achieve shock reduction and responsiveness when starting the engine from an idling stop. As a result, a smooth start off is made possible. For details, refer to 3ZR-FAE IDLING STOP CONTROL.



SPECIFICATION


CVT Assembly
Engine Type 3ZR-FE 3ZR-FAE
Shift Mechanism Type Pulley and Steel Belt ←
Forward/Reverse Switching Mechanism Single Pinion Type Planetary Gear ←
Pulley Ratio Forward 2.517 to 0.390 ←
Reverse 1.751 ←
Final Gear Ratio 5.791 ←
Fluid Type Toyota Genuine CVT Fluid FE ←
Fluid Capacity*1 7.1 Litters (7.5 US qts, 6.2 Imp. qts) ←
Weight (Reference)*2 94 kg (207.2 lb) 95 kg (209.4 lb)

HINT:

*1: Differential included.

*2: The weight shown is when the transaxle is filled with fluid.


Friction Discs and Gears
Planetary Gear No. of Sun Gear Teeth 71
No. of Pinion Gear Teeth 16
No. of Ring Gear Teeth 102
Reduction Gear No. of Drive Gear Teeth 26
No. of Driven Gear Teeth 40
Final Gear No. of Drive Gear Teeth 17
No. of Driven Gear Teeth 64
Forward Clutch No. of Discs 3
Reverse Brake No. of Discs 3

Torque Converter Assembly
Torque Converter Type 3-element, 1-step, 2-phase
Stall Torque Ratio 2.03