Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › from 2015.10
NM3090E _53 Suspension _008815 FRONT SUSPENSION _0050353 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  SUSPENSION SUPPORT  


CONSTRUCTION


a.

A separate input construction type suspension upper support is used. This construction transmits only the inputs from the shock absorber assembly and the front spring bumper to the body via the suspension support sub-assembly. Thus, the suspension upper support achieves superior quietness and ride comfort performance.

i.

The input is transmitted from the front coil spring to the body via the strut mounting bearing.


ii.

Because the front suspension support sub-assembly receives no input from the front coil spring, the rubber can be softened, thus achieving superior quietness and ride comfort.


iii.

Through the use of urethane, the front spring bumper has been given a nonlinear stiffness characteristic (the bumper becomes progressively stiffer during operation), thus both ensuring rolling rigidity during steering and achieving ride comfort.



b.

A dust cover which is fixed on its upper and lower sides is used to prevent the shock absorber sliding portions from becoming dirty.

X129447C01
3.885,0.865 4.302,0.448 true 4.094,0.938 4.667,0.698 true 3.802,1.708 4.875,1.792 true 4.063,2.24 4.906,2.333 true 2.021,1.875 2.865,1.969 true 2.344,3.01 3.396,2.667 true 1.844,1.76 2.156,1.917 0.313,0.156 10 false *1 2.167,2.927 2.479,3.083 0.313,0.156 10 false *2 4.948,2.26 5.26,2.417 0.313,0.156 10 false *3 4.917,1.708 5.229,1.865 0.313,0.156 10 false *4 4.708,0.573 5.021,0.729 0.313,0.156 10 false *5 4.333,0.313 4.646,0.469 0.313,0.156 10 false *6
*1 Front Coil Spring *2 Front Shock Absorber Assembly
*3 Shock Absorber Dust Cover *4 Front Spring Bumper
*5 Strut Mounting Bearing *6 Front Suspension Support Sub-assembly
V100135

Front Shock Absorber Assembly Input
V100136

Front Spring Bumper Input
V100137

Front Coil Spring Input - -