Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › from 2015.10
NM3090E _53 Suspension _008815 FRONT SUSPENSION _0050353 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  SHOCK ABSORBER  


CONSTRUCTION


a.

A low-pressure (N2) gas sealed front shock absorber assembly is used to achieve both driving stability and riding comfort.


b.

The damping force has been optimized to achieve superior maneuverability, stability and riding comfort.


c.

Internal friction has been reduced, thus allowing the absorber rod to move smoothly.


d.

A rebound spring is used to reduce roll angle and improve roll posture.

HINT:

To prevent hazardous conditions, make sure to empty the gas from the front shock absorber assembly before discarding the low-pressure (N2) gas sealed in the front shock absorber assembly. For details, refer to the Repair Manual.


X129448C01
2.938,1.302 3.406,1.531 true 2.906,1.823 3.51,2 true 2.917,2.438 3.5,2.531 true 2.938,3.396 3.469,3.313 true 2.969,4.302 3.552,4.177 true 2.75,1.177 3.063,1.333 0.313,0.156 10 false *1 2.75,1.719 3.063,1.875 0.313,0.156 10 false *2 2.75,2.344 3.063,2.5 0.313,0.156 10 false *3 2.771,3.302 3.083,3.458 0.313,0.156 10 false *4 2.802,4.208 3.115,4.365 0.313,0.156 10 false *5
*1 Oil Seal *2 Absorber Rod
*3 Rebound Spring *4 Piston Valve
*5 Base Valve - -
V100143

Oil
V100145

Low-pressure (N2) Gas



e.

The built-in rebound spring is designed to function with the suspension spring in order to restrain suspension extension during rebound. Also, in order to achieve a soft and comfortable ride, only the suspension springs are used when the suspension stroke is small during normal driving. However, when cornering, load is removed from the inner wheels, the functions of both the rebound spring and the suspension spring interact and the extension of the suspension is restrained. As a result, the vehicle has excellent maneuverability and stability.

X129392E01
0.74,0.938 0.896,0.938 0.896,0.938 1.146,1.156 true 0.75,2.01 0.885,2.01 0.885,2.01 1.125,1.781 true 2.51,3.854 2.792,3.854 2.792,3.854 3.219,4.698 true 4.385,0.323 6.469,0.604 2.083,0.281 10 false (a) Rebound Spring Free Length 4.385,0.667 6.938,0.979 2.552,0.313 10 false (b) Beginning Stroke of Rebound Spring 4.396,1.052 5.823,1.385 1.427,0.333 10 false (c) Standard Length 4.396,1.469 7.031,1.854 2.635,0.385 10 false (d) Compressed Height of Rebound Spring 4.417,1.823 6.552,2.406 2.135,0.583 10 false (e) Rebound Spring Limit of Shock Absorber Stroke 3.948,0.885 4.458,1.188 0.51,0.302 10 false (e) 3.604,0.906 4.115,1.208 0.51,0.302 10 false (d) 2.01,0.448 2.521,0.75 0.51,0.302 10 false (b) 2.271,1.104 2.781,1.406 0.51,0.302 10 false (c) 1.802,1.344 2.313,1.646 0.51,0.302 10 false (a) 0.146,0.854 0.76,1.552 0.615,0.698 10 false Rebound Spring 0.219,1.917 0.75,2.594 0.531,0.677 10 false Stopper Plate 0.719,2.969 1.833,3.354 1.115,0.385 10 false Typical Condition 2.604,2.969 3.719,3.354 1.115,0.385 10 false Fully Extended 0.26,3.292 4.281,3.625 4.021,0.333 10 false Characteristics of Shock Absorber with Built-in Rebound Spring 3.104,3.583 3.865,3.958 0.76,0.375 10 false Load 1.25,3.698 2.51,4.354 1.26,0.656 10 false Beginning Stroke of Rebound Spring 4.719,4.833 5.479,5.208 0.76,0.375 10 false Stroke 5.51,3.76 6.823,4.031 1.313,0.271 10 false : Entire suspension 5.51,4.083 6.823,4.354 1.313,0.271 10 false : Coil spring 5.5,4.417 6.813,4.688 1.313,0.271 10 false : Rebound spring 3.813,5.688 4.573,6.063 0.76,0.375 10 false [Bound] 2.49,5.698 3.25,6.073 0.76,0.375 10 false [Rebound] 0.323,5.708 1.458,6.031 1.135,0.323 10 false During Cornering 5.948,7.052 7.01,7.375 1.063,0.323 10 false Large Roll Angle 4.438,7.417 6.052,7.792 1.615,0.375 10 false Without Rebound Spring 0.635,7.438 2.25,7.813 1.615,0.375 10 false With Rebound Spring 2.354,7.083 3.51,7.438 1.156,0.354 10 false Small Roll Angle