Home › Engine / Hybrid System › 3ZR-FAE STOP AND START › STOP AND START SYSTEM › from 2015.10
NM3090E _51 Engine / Hybrid System _036990 3ZR-FAE STOP AND START _0171073 STOP AND START SYSTEM DE DETAILS F

3ZR-FAE STOP AND START  STOP AND START SYSTEM  DETAILS  ELECTRIC OIL PUMP FOR CVT  


CONSTRUCTION


a.

An electric oil pump is used only on models with CVT.


b.

The electric oil pump for CVT is provided for the stop and start system and is controlled by the engine stop and start ECU.


c.

The electric oil pump for CVT enables a stable CVT fluid supply during idle stop, and delivers good responsiveness and smoothness at the time of start off.


d.

The electric oil pump for CVT only operates when the engine is in the idle stop status. While the engine is operating, CVT fluid is supplied from the regular oil pump assembly.

Y177608C01
1.646,2.177 2.448,2.625 true 1.5,2.042 1.813,2.24 0.313,0.198 10 false *1
*1 Electric Oil Pump for CVT - -



e.

The electric oil pump for CVT consists of an oil pump motor driver section, DC sensorless and brushless motor section, and oil pump section.


f.

The oil pump motor driver controls the electric oil pump for CVT according to the signals from the engine stop and start ECU.

W115914C01
2.354,1.979 2.573,1.979 2.573,1.979 3,3.021 true 2.469,4.938 2.688,4.938 2.688,4.938 4.188,3.823 true 3.333,5.365 3.552,5.365 3.552,5.365 4.24,4.26 true 5.094,3.354 5.698,3.354 true 4.385,3.375 5.49,2.615 5.49,2.615 5.708,2.615 true 2.156,1.906 2.365,2.094 0.208,0.188 10 false *1 2.271,4.865 2.5,5.052 0.229,0.188 10 false *2 3.135,5.292 3.344,5.469 0.208,0.177 10 false *3 5.76,3.281 5.979,3.469 0.219,0.188 10 false *4 5.76,2.542 5.99,2.719 0.229,0.177 10 false *5 2.698,0.75 2.906,0.927 0.208,0.177 10 false *a 4.031,0.75 4.25,0.927 0.219,0.177 10 false *b 4.927,0.75 5.135,0.938 0.208,0.188 10 false *c
*1 Pump Rotor *2 Magnet
*3 Stator Core *4 Oil Pump Motor Driver
*5 Shaft - -
*a Oil Pump Section *b DC Sensorless and Brushless Motor Section
*c Oil Pump Motor Driver Section - -




OPERATION


a.

The oil pump assembly in the CVT, which is powered by the engine, generates oil pressure. When the oil pump assembly is generating sufficient oil pressure, the electric oil pump for CVT is not operating and is isolated by a check valve located in the discharge section of the electric oil pump for CVT.

W117274E01
0.354,0.427 0.917,0.646 0.563,0.219 10 false Oil Flow 2.083,0.323 3.125,0.552 1.042,0.229 10 false CVT Valve Body 1.385,1.656 2.021,2.094 0.635,0.438 10 false Oil Pump Assembly 2.229,2.021 2.875,2.229 0.646,0.208 10 false Operating 3.469,2.042 4.333,2.271 0.865,0.229 10 false Not Operating 2.927,1.365 3.719,1.594 0.792,0.229 10 false Check Valve 4.844,1.792 5.958,2.24 1.115,0.448 10 false Electric Oil Pump for CVT 1.438,3.333 2.188,3.563 0.75,0.229 10 false Oil Strainer 0.448,3.313 0.979,3.531 0.531,0.219 10 false Oil Pan


b.

During idle stop operation, the oil pump assembly in the CVT stops generating oil pressure. At this time, the electric oil pump for CVT operates and generates oil pressure to open the check valve and supply oil pressure to the CVT valve body.

W117275E01
0.333,0.427 0.875,0.656 0.542,0.229 10 false Oil Flow 1.365,1.667 2.01,2.125 0.646,0.458 10 false Oil Pump Assembly 2.104,0.323 3.125,0.563 1.021,0.24 10 false CVT Valve Body 2.854,1.375 3.656,1.635 0.802,0.26 10 false Check Valve 1.438,3.344 2.188,3.604 0.75,0.26 10 false Oil Strainer 2.146,2.031 3.031,2.26 0.885,0.229 10 false Not Operating 3.552,2.021 4.198,2.25 0.646,0.229 10 false Operating 4.844,1.771 5.958,2.219 1.115,0.448 10 false Electric Oil Pump for CVT 0.427,3.333 0.969,3.563 0.542,0.229 10 false Oil Pan


c.

During engine automatic start operation, oil pressure generated by both the electric oil pump for CVT and the oil pump assembly is applied to the system. When the oil pressure generated by the oil pump assembly exceeds the oil pressure generated by the electric oil pump for CVT, the check valve closes and the oil pressure generated from the electric oil pump for CVT is no longer applied. The electric oil pump for CVT stops according to engine speed signals.

W117276E01
0.344,1.792 0.906,2.021 0.563,0.229 10 false Oil Flow 4.865,3.76 6,4.177 1.135,0.417 10 false Electric Oil Pump for CVT 1.427,3.583 2.073,4.042 0.646,0.458 10 false Oil Pump Assembly 2.906,3.354 3.74,3.563 0.833,0.208 10 false Check Valve 1.417,5.302 2.146,5.531 0.729,0.229 10 false Oil Strainer 0.438,5.313 0.969,5.563 0.531,0.25 10 false Oil Pan 2.094,2.302 3.156,2.531 1.063,0.229 10 false CVT Valve Body 2.26,4.01 2.896,4.25 0.635,0.24 10 false Operating 3.604,4.01 4.24,4.25 0.635,0.24 10 false Operating 2.542,0.51 2.698,0.708 0.156,0.198 10 false A 2.583,1.135 2.74,1.333 0.156,0.198 10 false A 2.573,1.76 2.729,1.958 0.156,0.198 10 false A 3.625,1.76 3.781,1.958 0.156,0.198 10 false B 3.656,1.146 3.813,1.344 0.156,0.198 10 false B 3.615,0.531 3.771,0.729 0.156,0.198 10 false B 2.313,0.167 2.615,0.365 0.302,0.198 10 false Low 2.323,0.76 2.802,0.948 0.479,0.188 10 false Middle 3.708,0.76 4.188,0.948 0.479,0.188 10 false Middle 3.698,0.167 4.177,0.354 0.479,0.188 10 false Middle 2.302,1.375 2.635,1.573 0.333,0.198 10 false High 4.271,0.094 7.01,0.563 2.74,0.469 10 false A<B (Immediately after engine start, the oil pressure from the oil pump assembly is low.) 4.438,0.885 6.677,1.375 2.24,0.49 10 false A=B (Oil pressure from the oil pump assembly increases gradually.) 4.313,1.74 6.854,2 2.542,0.26 10 false A>B (Electric oil pump for CVT stops.)