Home › Power Source / Network › 2WW BATTERY / CHARGING › CHARGING SYSTEM › from 2015.10
NM3090E _57 Power Source / Network _047564 2WW BATTERY / CHARGING _0224816 CHARGING SYSTEM DE DETAILS F

2WW BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY CURRENT SENSOR  


CONSTRUCTION


a.

The generator control ECU assembly installed on the negative (-) terminal of the battery detects the battery charge and discharge current and calculates the battery capacity.


b.

A shunt resistor is used for detection of the charge and discharge current. The battery charge and discharge current is converted and calculated by measuring the voltage drop across the shunt resistor.

Y181645C01
3.708,2.146 6.083,1.75 true 6.146,1.615 6.458,1.771 0.313,0.156 10 false *1
*1 Generator Control ECU Assembly - -