Home › Power Source / Network › 2WW BATTERY / CHARGING › CHARGING SYSTEM › from 2015.10
NM3090E _57 Power Source / Network _047564 2WW BATTERY / CHARGING _0224816 CHARGING SYSTEM DE DETAILS F

2WW BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY TEMPERATURE SENSOR  


CONSTRUCTION


a.

The battery temperature sensor is built into the generator control ECU assembly.


b.

The battery characteristic (battery internal resistance) of taking in current for charging varies according to battery electrolyte temperature. If the electrolyte temperature is too low or too high, the battery internal resistance will increase, resulting in early deterioration. To prevent this, the battery temperature sensor sends to generator control ECU assembly.