Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2015.10
NM3090E _58 Vehicle Interior _047639 PRE-CRASH SAFETY _0225258 PRE-CRASH SAFETY SYSTEM DE DETAILS F

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  DETAILS  INDICATOR LIGHT/WARNING LIGHT/MULTI DISPLAY  


OPERATION


a.

Warning Indication

i.

The combination meter assembly uses the multi-information display, master warning light, PCS warning light and buzzer to provide the driver with pre-crash safety system warnings and indications.


ii.

If the driving support ECU assembly determines that there is a possibility of a collision is high, it sends a signal to the combination meter assembly. Upon receiving this signal, the combination meter assembly indicates a warning using the multi-information display, master warning light, PCS warning light and pre-crash safety city buzzer. Details are indicated below.

When there is a high possibility of a collision
Multi-information Display PCS Warning Light Pre-crash Safety City Buzzer
BRAKE ! Flashes Sound Continuously


iii.

The pre-crash safety system can be turn on and off through the setting screen on the multi-information display. When the pre-crash safety system is off, "Pre-Crash Safety System Turned Off" is displayed on the multi-information display and the PCS warning light illuminates.

When the setting screen on the multi-information display is operated
Multi-information Display PCS Warning Light Pre-crash Safety System
- - ON
Pre-Crash Safety System Turned Off Illuminates OFF


iv.

When the system is not available, the following warning occurs to warn the driver.

When a system malfunction is detected
Multi-information Display Detail Master Warning Light PCS Warning Light Buzzer DTC
Pre-Crash Safety System
Malfunction
Visit Your Dealer
This message appears when the driving support ECU assembly detects a system malfunction. Illuminates Flashes Sounds once Repair is required and DTCs are stored
Pre-Crash Safety System
Unavailable
Millimeter wave radar sensor assembly is misaligned - Flashes - -
Pre-Crash Safety System
Unavailable
Clean Radar
Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly - Flashes - -
Front Camera Systems
Unavailable
Clean Windshield
Dirty windshield glass over the forward recognition camera (pre-crash safety city sensor) - Flashes - -
Front Camera Systems
Unavailable
Wait a Moment
Temperature or power supply of forward recognition camera (pre-crash safety city sensor) is abnormality - Flashes - -
VSC Turned Off
Pre-Crash Safety Brake System
Unavailable
VSC and TRAC operation has not been disabled - Illuminates - -



b.

Changing settings of the pre-crash safety system

i.

To change the enabled or disabled of the pre-crash safety system using the multi-information display and the steering pad switch assembly (meter control switches), display the setting display screen.

·

On the setting display screen, select PCS icon and then press on Enter/Set switch on the steering pad switch assembly.

·

Select [PCS] and then press on Enter/Set switch the steering wheel. Each time is pressed, the system will be enabled/disabled.

Y190092C01
5.375,4.302 5.552,3.635 true 1.427,1.646 1.74,1.844 0.313,0.198 10 false *a 3.635,1.99 3.948,2.188 0.313,0.198 10 false *b 4.5,3.135 4.813,3.333 0.313,0.198 10 false *c 5.49,3.438 5.802,3.635 0.313,0.198 10 false *d
*a PCS warning Light *b Multi-information Display
*c Steering Pad Switch Assembly *d Enter/Set Switch




ii.

The pre-crash warning timing can be changed on setting display of the multi-information display.

·

On the setting display screen, select PCS icon and then press on Enter/Set switch on the steering pad switch assembly.

·

Select [Sensitivity] and then press on Enter/Set switch the steering wheel. Each time Enter/Set switch is pressed, operation timing (Far/Middle/Near) of the pre-crash safety system will be changed.

Y190009C01
5.354,3.49 5.458,2.781 true 0.719,0.198 1.031,0.354 0.313,0.156 10 false *a 1.271,0.354 1.583,0.51 0.313,0.156 10 false *b 2.792,0.354 3.104,0.51 0.313,0.156 10 false *c 4.344,0.375 4.656,0.531 0.313,0.156 10 false *d 4.469,2.313 4.781,2.469 0.313,0.156 10 false *e 5.417,2.583 5.729,2.74 0.313,0.156 10 false *f
*a Multi-information Display *b Far
*c Middle *d Near
*e Steering Pad Switch Assembly *f Enter/Set Switch