Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › from 2016.08
NM3090E _58 Vehicle Interior _009123 LIGHTING (INT) _0050690 LIGHTING SYSTEM GE GENERAL F

LIGHTING (INT)  LIGHTING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Interior Light

i.

Each kind of light is used to enhance convenience and comfort.



b.

Illuminated Entry System

i.

An illuminated entry system is used, which turns on in response to the opening and closing of each door, to enhance usability at night and produce a pleasing cabin space.


ii.

The illuminated entry system is controlled by the main body ECU (multiplex network body ECU).




SPECIFICATION


a.

Interior Light

Light Specification

*1: Models without entry and start system

*2: Models with entry and start system

*3: Models with Intrerior Illumination Light Sub-assembly (Instrument Panel Illumination)

*4: Models with interior illumination light assembly (footwell light)

Map Light Assembly (Front Room Light) 12 V, 5 W
No. 1 Room Light Assembly (Rear Room Light) 12 V, 8 W
No. 2 Room Light Assembly 12 V, 5 W
Vanity Light Assembly 12 V, 8 W
Ignition Switch Illumination*1 LED
Engine Switch Illumination*2 LED
Intrerior Illumination Light Sub-assembly (Instrument Panel Illumination)*3 LED
No.1 Interior Illumination light assembly (Footwell Light)*4 LED



PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)