Home › Engine / Hybrid System › 1AD-FTV EMISSION CONTROL › EGR VALVE › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008371 1AD-FTV EMISSION CONTROL _0046701 EGR VALVE A

1AD-FTV EMISSION CONTROL  EGR VALVE  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 25625 4.REMOVE EGR VALVE BRACKET

a.
A291454

Disconnect the 2 connectors and detach the 2 wire harness clamps.


b.
A206475

Remove the 3 bolts and EGR valve bracket.


Hide 16295 5.DISCONNECT NO. 7 WATER BY-PASS HOSE

a.
A201866

Slide the clamp and disconnect the No. 7 water by-pass hose from the electric EGR control valve assembly.


Hide 16296 6.DISCONNECT NO. 8 WATER BY-PASS HOSE

a.
A201867

Slide the clamp and disconnect the No. 8 water by-pass hose from the electric EGR control valve assembly.


Hide 25602 7.REMOVE NO. 2 EGR PIPE SUB-ASSEMBLY

a.
A291349

Disconnect the electric EGR control valve connector.


b.
A197541C01
0.656,1.844 0.969,2 0.313,0.156 10 *1
*1 Nut


Remove the 3 bolts, 2 nuts and No. 2 EGR pipe sub-assembly.


c.

Remove the 2 gaskets.


Hide 25800 8.REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY

a.
A197543

Remove the electric EGR control valve assembly and gasket.