Home › Engine / Hybrid System › 2AD-FTV ENGINE MECHANICAL › CYLINDER HEAD
RM3090E _51 Engine / Hybrid System _008372 2AD-FTV ENGINE MECHANICAL _0046719 CYLINDER HEAD A

2AD-FTV ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

HINT:

Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


a.

Place the cylinder head sub-assembly on a wooden block.


b.
A111290
2.26,0.604 2.083,0.302 2.083,0.302 1.99,0.302 false 1.646,0.229 1.938,0.396 0.292,0.167 10 SST

Using SST, compress the inner compression spring and remove the valve spring retainer lock.

SST
09202-70020  


c.

Remove the valve spring retainer, inner compression spring and intake valve.


Hide 13715 2.REMOVE EXHAUST VALVE

HINT:

Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


a.

Place the cylinder head sub-assembly on a wooden block.


b.
A111289
1.052,0.427 1.271,0.281 false 1.292,0.188 1.625,0.344 0.333,0.156 10 SST

Using SST, compress the inner compression spring and remove the valve spring retainer lock.

SST
09202-70020  


c.

Remove the valve spring retainer, inner compression spring and exhaust valve.


Hide 3.REMOVE VALVE STEM OIL SEAL

a.
A111291

Using needle-nose pliers, remove the valve stem oil seal.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A111292

Using compressed air and a magnet hand, remove the valve spring seats by blowing air.


Hide 11117E 5.REMOVE NO. 1 STRAIGHT SCREW PLUG WITH HEAD

a.
A203795

Using a 6 mm hexagon wrench, remove the 4 No. 1 straight screw plugs.


Hide 6.REMOVE CYLINDER HEAD STUD BOLT

HINT:

If a cylinder head stud bolt is deformed or the threads are damaged, replace it.