Home › Engine / Hybrid System › 2AD-FTV COOLING › THERMOSTAT
RM3090E _51 Engine / Hybrid System _008373 2AD-FTV COOLING _0046725 THERMOSTAT A

2AD-FTV COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 16264D 3.REMOVE NO. 2 WATER BY-PASS HOSE

a.
A295978

Slide the 2 clamps and remove the No. 2 water by-pass hose from the No. 4 water by-pass pipe and radiator reservoir assembly.


Hide 16572D 4.DISCONNECT NO. 2 RADIATOR HOSE

Hide 16288 5.REMOVE NO. 4 WATER BY-PASS PIPE

a.
A116608

Remove the bolt and No. 4 water by-pass pipe.


b.

Remove the O-ring from the No. 4 water by-pass pipe.


Hide 16321 6.REMOVE WATER INLET

a.
A196775

Remove the 3 bolts and water inlet.


Hide 16331A 7.REMOVE THERMOSTAT

a.

Remove the thermostat.


b.

Remove the gasket from the thermostat.