Home › Engine / Hybrid System › 1AD-FTV LUBRICATION › OIL PUMP › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008379 1AD-FTV LUBRICATION _0046755 OIL PUMP A

1AD-FTV LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL OIL PUMP COVER

a.
A291293
1.99,0.302 2.74,0.302 true 2.083,0.302 2.083,0.25 2.083,0.25 2.875,0.25 true 3.188,0.917 3,0.917 3,0.917 3,0.531 true 3.167,1.073 3.167,0.49 true 1.833,0.208 2.146,0.365 0.313,0.156 10 *1 3.083,1.073 3.396,1.229 0.313,0.156 10 *1
*1 Mark


Install the drive rotor and driven rotor to the timing chain cover sub-assembly with the marks of the rotor facing the cylinder block sub-assembly side. Check that the rotors revolve smoothly.


b.

Install the oil pump cover with the 10 bolts.

Torque:
8.8 N*m (90 kgf*cm, 78 in.*lbf)