Home › Engine / Hybrid System › 1AD-FTV LUBRICATION › OIL PRESSURE SWITCHING VALVE › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008379 1AD-FTV LUBRICATION _0046759 OIL PRESSURE SWITCHING VALVE A

1AD-FTV LUBRICATION  OIL PRESSURE SWITCHING VALVE  INSTALLATION  


PROCEDURE

Hide 15350A 1.INSTALL OIL PRESSURE SWITCHING VALVE ASSEMBLY

a.
A263875C01
2.021,1.146 2.5,0.583 2.5,0.583 2.667,0.583 true 2.688,0.49 3,0.646 0.313,0.156 10 *1
*1 O-Ring


Apply a light coat of engine oil to the O-ring of the oil pressure switching valve assembly.


b.

Install the oil pressure switching valve assembly with the bolt.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)

NOTICE:
·

When reusing the oil pressure switching valve assembly, inspect the O-ring.

·

Make sure that the O-ring is not cracked or jammed when installing the oil pressure switching valve assembly.




c.

Connect the oil pressure switching valve connector and attach the wire harness clamp.


Hide 51441 5.INSTALL NO. 1 ENGINE UNDER COVER