Home › Engine / Hybrid System › 2AD-FTV INTAKE / EXHAUST › EXHAUST PIPE › 2012.12–2014.10
RM3090E _51 Engine / Hybrid System _008383 2AD-FTV INTAKE / EXHAUST _0046768 EXHAUST PIPE A

2AD-FTV INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves and protective glasses when removing the exhaust pipe.

·

The exhaust pipe is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe has cooled down before removing it.



PROCEDURE

Hide 17430 1.REMOVE TAILPIPE ASSEMBLY

a.

Remove the 2 bolts and 2 compression springs.


b.

Disconnect the tailpipe assembly from the 2 exhaust pipe supports.


c.

Remove the gasket.


Hide 17410 2.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.

Remove the 2 bolts and 2 compression springs.


b.

Disconnect the front exhaust pipe assembly from the 3 exhaust pipe supports.


c.

Remove the gasket.


Hide 89467B 3.REMOVE AIR FUEL RATIO SENSOR (for DPF)