Home › Engine / Hybrid System › 2AD-FHV LUBRICATION › OIL LEVEL SENSOR
RM3090E _51 Engine / Hybrid System _008384 2AD-FHV LUBRICATION _0046778 OIL LEVEL SENSOR G

2AD-FHV LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

a.
A291394
2.292,0.802 3.042,0.802 true 2.219,0.667 2.875,0.5 2.875,0.5 3.042,0.5 true 2.802,2.375 3.115,2.531 0.313,0.156 10 *a 2.813,2.813 3.125,2.969 0.313,0.156 10 *b 3.083,0.708 3.24,0.906 0.156,0.198 10 2 3.073,0.406 3.229,0.604 0.156,0.198 10 1
*a On
*b Off


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 On Below 0.5 Ω
Off 1 MΩ or higher


If the result is not as specified, replace the engine oil level sensor.