Home › Engine / Hybrid System › 2AD-FTV LUBRICATION › OIL PUMP
RM3090E _51 Engine / Hybrid System _008385 2AD-FTV LUBRICATION _0046783 OIL PUMP A

2AD-FTV LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 15131 1.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the oil pump relief valve with engine oil.


b.

Install the oil pump relief valve and oil pump relief valve spring to the oil pump cover.


c.

Install the oil pump relief valve plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)


Hide 2.INSTALL OIL PUMP COVER

a.
A291293
1.99,0.302 2.74,0.302 true 2.083,0.302 2.083,0.25 2.083,0.25 2.875,0.25 true 3.188,0.917 3,0.917 3,0.917 3,0.531 true 3.167,1.073 3.167,0.49 true 1.833,0.208 2.146,0.365 0.313,0.156 10 *1 3.083,1.073 3.396,1.229 0.313,0.156 10 *1
*1 Mark


Install the drive rotor and driven rotors to the timing chain cover sub-assembly with the marks of the rotor facing the cylinder block sub-assembly side. Check that the rotors revolve smoothly.


b.

Install the oil pump cover with the 10 bolts.

Torque:
8.8 N*m (90 kgf*cm, 78 in.*lbf)