Home › Engine / Hybrid System › 2AD-FTV ENGINE CONTROL › AIR FUEL RATIO SENSOR(for DPF)
RM3090E _51 Engine / Hybrid System _008377 2AD-FTV ENGINE CONTROL _0046804 AIR FUEL RATIO SENSOR(for DPF) G

2AD-FTV ENGINE CONTROL  AIR FUEL RATIO SENSOR(for DPF)  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A273331
1.417,0.854 1.146,0.365 1.146,0.365 0.969,0.365 true 1.979,0.854 2.115,0.365 2.115,0.365 2.302,0.365 true 0.719,0.292 1.031,0.49 0.313,0.198 10 +B 2.417,0.281 3.031,0.479 0.615,0.198 10 HAF2 0.125,0.135 0.438,0.333 0.313,0.198 10 *a
*a Component without harness connected (Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HAF2) - 2 (+B) 20°C (68°F) 1.8 to 3.4 Ω


HINT:

The temperature indicated in "Condition" is the temperature of the air fuel ratio sensor.


If the result is not as specified, replace the air fuel ratio sensor.