Home › Engine / Hybrid System › 2AD-FTV ENGINE CONTROL › ECD SYSTEM(for DPF)
RM3090E _51 Engine / Hybrid System _008377 2AD-FTV ENGINE CONTROL _0046807 ECD SYSTEM(for DPF) C

2AD-FTV ENGINE CONTROL  ECD SYSTEM(for DPF)  P2002  Particulate Trap Efficiency Below Threshold (Bank1)  


DESCRIPTION

A284208
6.365,1.531 6.26,1.76 false 5.979,2.281 5.646,2.042 false 3.521,1.51 2.594,1.969 2.594,1.969 4.635,1.708 false 0.531,2.5 1.094,2.125 false 4.24,5.083 4.448,4.552 false 3.896,3.604 3.563,3.365 false 2.958,5.188 1.917,5.188 false 2.833,4.781 2.26,3.646 false 2.833,5.5 1.365,6.313 false 0.042,0.052 2.292,0.458 2.25,0.406 10 false DPF (Diesel Particulate Filter): 3.354,0.271 4.969,0.635 1.615,0.365 10 false Monolithic Construction: 2.344,0.635 3.333,1.083 0.99,0.448 10 false PM, HC, CO 3.604,1.938 4.813,2.344 1.208,0.406 10 false Cross Section 5.469,0.396 6.656,0.802 1.188,0.406 10 false Wall-Flow Type: 4.698,1.448 5.688,1.896 0.99,0.448 10 false CO2, H2O 6.156,1.781 6.927,2.302 0.771,0.521 10 false Gas Flow 5.906,2.313 6.677,2.833 0.771,0.521 10 false PM 5.323,2.563 6.719,3.083 1.396,0.521 10 false Magnified View 2.042,2.063 3.427,2.594 1.385,0.531 10 false Alternating Blocked Passages 0.375,2.531 3.083,2.969 2.708,0.438 10 false DPF (Diesel Particulate Filter) Catalyst 2.313,2.927 3.708,3.427 1.396,0.5 10 false Exhaust Gas 3.958,3.521 5.99,4.031 2.031,0.51 10 false Exhaust Fuel Addition Injector 4.49,4.448 6.417,4.979 1.927,0.531 10 false Differential Pressure Sensor 0.406,5.125 2.177,5.458 1.771,0.333 10 false DPF Catalytic Converter 0.115,3.542 2.24,4.385 2.125,0.844 10 false Exhaust Gas Temperature Sensor B1S1 0.417,6.385 4.615,6.698 4.198,0.313 10 false NO. 2 Exhaust Gas Temperature Sensor B1S2 5.823,5.688 6.656,6.219 0.833,0.531 10 false ECM

HINT:
·

For more information on the Diesel Particulate Filter (DPF) catalytic converter, refer to the following procedures (Click here Engine / Hybrid System>2AD-FTV ENGINE CONTROL>ECD SYSTEM(for DPF)>SYSTEM DESCRIPTION).

·

If P2002 is present, refer to the DTC table for Diesel Particulate Filter System (Click here Engine / Hybrid System>2AD-FTV ENGINE CONTROL>ECD SYSTEM(for DPF)>SYSTEM DESCRIPTION).



HINT:

The DPF catalyst has an ability to reduce particulate matter (PM), hydrocarbons (HC) and carbon monoxides (CO). The DPF catalyst is a monolithic type catalyst. Alternating passages in the catalyst have either their inlet or outlet blocked. This forces the exhaust gasses to flow through the walls of the passages (see illustration above). Due to the flow of the exhaust gasses through micro-cavities in the passage walls, it is called a "wall flow" type converter.


DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P2002 Particulate Trap Efficiency Below Threshold (Bank1) The Catalyst Record exceeds the threshold (Thermal deterioration malfunction)
(1 trip detection logic).
DPF catalytic converter (Exhaust manifold converter sub-assembly) Comes on DTC stored

Related Data List
DTC No. Data List
P2002 DPF Thermal Deteriorate

MONITOR DESCRIPTION

In order to detect abnormality in the DPF catalytic converter, the ECM monitors the exhaust gas temperature as well as differential pressure in front of and behind the DPF catalyst.

Thermal deterioration malfunction

Furthermore, the ECM calculates and integrates the Catalyst Record of catalyst thermal deterioration data with the catalyst temperature. If Catalyst Record exceeds the threshold, the ECM interprets this as a malfunction in the DPF catalyst and illuminates the MIL.


A193875
1.469,1.719 1.927,1.552 false 2.698,1.125 2.938,0.667 2.938,0.667 3.188,0.667 false 3.24,0.583 5.906,0.896 2.667,0.313 10 "DPF Catalyst Deteriorate" Detection Area 5.458,2.917 5.844,3.146 0.385,0.229 10 Time 1.833,2.896 1.958,3.083 0.125,0.188 10 0 0.833,1.646 1.479,1.917 0.646,0.271 10 Threshold 0.125,0.052 2.229,0.542 2.104,0.49 10 Thermal Deterioration Malfunction: (DPF Catalyst Deterioration) 0.896,0.667 1.938,0.938 1.042,0.271 10 Catalyst Record 3.271,2.01 5.104,2.5 1.833,0.49 10 Integrating in accordance with catalyst temperature

CAUTION / NOTICE / HINT

NOTICE:

After replacing the exhaust manifold converter sub-assembly (DPF catalyst), clear the thermal deterioration data stored in the ECM.


HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.REPLACE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
HINT:

When the DPF catalytic converter (Exhaust manifold converter sub-assembly) is replaced, the catalyst record of DPF thermal deterioration stored in the ECM must be cleared.


a.

Replace the DPF catalytic converter (Exhaust manifold converter sub-assembly).

Click hereEngine / Hybrid System>2AD-FTV EMISSION CONTROL>MONOLITHIC CONVERTER(for DPF)>REMOVAL


Result:
Proceed to
NEXT



NEXT

2.CATALYST RECORD CLEAR
2.CATALYST RECORD CLEAR
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Enter the menu options in this order: Powertrain / Engine and ECT / Utility / Catalyst Record Clear.

Powertrain > Engine > Utility
Tester Display
Catalyst Record Clear
50005 61 178

Result:
Proceed to
NEXT



NEXT

END