Home › Engine / Hybrid System › 3ZR-FAE ENGINE MECHANICAL › CYLINDER HEAD › 2012.12–2014.10
RM3090E _51 Engine / Hybrid System _008387 3ZR-FAE ENGINE MECHANICAL _0046813 CYLINDER HEAD A

3ZR-FAE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A150946E02
1.413,0.22 1.745,0.381 0.333,0.161 10 SST 1.803,0.314 1.897,0.314 1.897,0.314 1.948,0.563 false

Place the cylinder head sub-assembly on wooden blocks.


b.

Using SST, compress the compression spring and remove the valve retainer locks.

SST
09202-70020  (09202-00010)

HINT:

Arrange the removed parts in the correct order.



c.

Remove the retainer, compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A150947E02
0.114,0.191 0.447,0.352 0.333,0.161 10 SST 0.505,0.284 0.598,0.284 0.598,0.284 0.649,0.533 false

Place the cylinder head sub-assembly on wooden blocks.


b.

Using SST, compress the compression spring and remove the valve retainer locks.

SST
09202-70020  (09202-00010)

HINT:

Arrange the removed parts in the correct order.



c.

Remove the retainer, compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 3.REMOVE VALVE STEM OIL SEAL

a.
A150948

Using needle-nose pliers, remove the valve stem oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A150949

Using compressed air and a magnet hand, remove the valve spring seats by blowing air onto them.


Hide 11117B 5.REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:

If water leaks from the No. 2 straight screw plug or the plug is corroded, replace it.


a.
A150950

Using a 10 mm straight hexagon wrench, remove the 3 No. 2 screw plugs and 3 gaskets.


Hide 6.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.