Home › Engine / Hybrid System › 3ZR-FAE FUEL › FUEL PUMP
RM3090E _51 Engine / Hybrid System _008388 3ZR-FAE FUEL _0046821 FUEL PUMP A

3ZR-FAE FUEL  FUEL PUMP  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repairs" after replacing the fuel pump.

Click hereEngine / Hybrid System>3ZR-FAE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


PROCEDURE

Hide 1.INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP

a.

Install a new gasket to the fuel suction tube assembly with pump.


b.
A202412C01
1.073,1.427 0.917,1.427 0.917,1.427 0.552,1.604 false 1.563,3.198 1.115,2.875 1.115,2.875 0.865,2.875 false 1.104,1.344 1.333,1.542 0.229,0.198 10 *1 0.677,2.802 0.906,3 0.229,0.198 10 *2 0.573,0.917 0.802,1.115 0.229,0.198 10 *a
*1 Paint Mark
*2 Fuel Hose
*a Top of Vehicle


Connect the fuel hose with the paint mark facing towards the top of the vehicle, and then secure the clip.


c.

Install the fuel suction tube assembly with pump to the fuel tank assembly.

NOTICE:

Do not damage the fuel suction tube assembly with pump.



Hide 77168A 2.INSTALL FUEL TANK VENT TUBE SET PLATE

a.

Install the fuel tank vent tube set plate with the 8 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 77209D 3.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.
A124668

Install the fuel tank main tube sub-assembly with the tube joint clip.

NOTICE:
·
A124131C01
0.969,0.76 0.729,0.385 0.729,0.385 0.573,0.385 false 1.656,0.573 1.729,0.198 1.729,0.198 1.896,0.198 false 1.625,1.083 2.094,1.479 2.094,1.479 2.26,1.479 true 0.979,1.25 0.573,1.5 0.573,1.5 0.99,1.396 true 1.104,3.24 1.375,3.094 1.375,3.094 1.542,3.094 false 2.438,3.271 2.75,2.813 2.75,2.813 2.917,2.813 true 0.802,3.406 1.031,3.75 1.031,3.75 1.198,3.75 true 0.375,0.313 0.594,0.49 0.219,0.177 10 *1 1.927,0.135 2.146,0.313 0.219,0.177 10 *2 2.313,1.406 2.531,1.583 0.219,0.177 10 *3 0.406,1.438 0.625,1.615 0.219,0.177 10 *4 1.573,3.031 1.792,3.208 0.219,0.177 10 *3 2.948,2.75 3.167,2.927 0.219,0.177 10 *5 0.813,4.365 1.031,4.542 0.219,0.177 10 *a 2.375,4.313 2.594,4.49 0.219,0.177 10 *b 1.208,3.667 1.427,3.844 0.219,0.177 10 *5
*1 Fuel Tube Joint
*2 Fuel Tube
*3 Tube Joint Clip
*4 O-Ring
*5 Collar
*a CORRECT
*b INCORRECT


Check that there are no scratches or foreign objects on the connecting parts.

·

Check that the fuel tube joint is inserted securely.

·

Check that the tube joint clip is on the collar of the fuel tube joint.

·

After installing the tube joint clip, check that the fuel tube joint cannot be pulled off.

·

Be careful not to damage the tube joint clip. If the tube joint clip is damaged, replace it.




Hide 4.INSTALL FUEL EMISSION HOSE

a.

Connect the No. 1 fuel evaporation tube sub-assembly and charcoal canister outlet tube sub-assembly to the fuel suction plate and slide the 2 clamps to secure the tubes.

A213193C01
1.76,0.375 1.885,0.375 1.885,0.375 2.063,0.802 true 0.802,2 0.802,1.927 0.802,1.927 1.375,1.677 true 2.313,2 2.313,1.75 true 5.323,3.313 5.479,3.469 0.156,0.156 10 B 5.354,1.656 5.51,1.813 0.156,0.156 10 A 4.708,0.75 5.063,0.917 0.354,0.167 10 180° 5.802,2.458 6.156,2.625 0.354,0.167 10 160° 5.99,0.927 6.271,1.094 0.281,0.167 10 45° 4.604,2.5 4.885,2.667 0.281,0.167 10 55° 1.594,0.292 1.781,0.479 0.188,0.188 10 *1 0.719,2.021 0.906,2.208 0.188,0.188 10 *2 2.24,2.021 2.427,2.208 0.188,0.188 10 *3 2.438,1.125 2.594,1.281 0.156,0.156 10 B 0.979,1.385 1.156,1.573 0.177,0.188 10 A 5.313,0.396 5.5,0.583 0.188,0.188 10 *a 5.271,2.031 5.458,2.219 0.188,0.188 10 *a 4.552,1.177 4.74,1.365 0.188,0.188 10 *b 6.021,2.802 6.208,2.99 0.188,0.188 10 *c
*1 No. 1 Fuel Evaporation Tube Sub-assembly *2 Charcoal Canister Outlet Tube Sub-assembly
*3 Fuel Emission Hose - -
*a Top of Vehicle *b LH Side
*c RH Side - -


HINT:

Make sure the direction of the hose clamps are as indicated in the illustration.



b.

Connect the fuel emission hose to the fuel suction plate.

NOTICE:
·

Before connecting the hose, check if there is any damage or foreign matter in the hose or connector.

·

Check that the connector is connected by pulling on it.



HINT:

Firmly push the tube connector until a "click" sound is heard.