Home › Engine / Hybrid System › 3ZR-FAE FUEL › FUEL PUMP
RM3090E _51 Engine / Hybrid System _008388 3ZR-FAE FUEL _0046821 FUEL PUMP A

3ZR-FAE FUEL  FUEL PUMP  REMOVAL  


PROCEDURE

Hide 2.DISCONNECT FUEL EMISSION HOSE

a.
A202413C01
1.365,0.167 1.51,0.167 1.51,0.167 1.958,1.198 true 0.458,2.646 0.458,2.542 0.458,2.542 1.156,2.156 true 2.406,2.563 2.406,2.25 true 1.479,3.396 1.479,3.177 1.479,3.177 2.656,3.177 true 1.906,3.396 1.906,3.177 true 1.167,0.094 1.354,0.271 0.188,0.177 10 *1 2.323,2.604 2.521,2.781 0.198,0.177 10 *3 0.375,2.688 0.583,2.865 0.208,0.177 10 *2 2.708,3.083 2.906,3.25 0.198,0.167 10 *4
*1 No. 1 Fuel Evaporation Tube Sub-assembly
*2 Charcoal Canister Outlet Tube Sub-assembly
*3 Fuel Emission Hose
*4 Retainer


Slide the 2 clamps and disconnect the No. 1 fuel evaporation tube sub-assembly and charcoal canister outlet tube sub-assembly from the fuel suction plate.


b.

Pinch the retainer as shown in the illustration, and then disconnect the fuel emission hose from the fuel suction plate.

NOTICE:
·

Clean off any dirt and foreign matter from the clip before disconnecting the hoses.

·

Do not use any tools in this procedure.

·

Do not forcefully bend or twist the nylon tube.

·

Put the hose in a plastic bag to prevent damage and contamination.

·

If the connector is stuck, pinch the retainer and push and pull the hose to disconnect it.




Hide 77209D 3.DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.
A124669

Remove the tube joint clip and fuel tank main tube sub-assembly.

NOTICE:
·

Before removing the tube joint clip, check for foreign matter around the clip. Clean if necessary.

·

Keep the O-ring free of foreign matter, as it becomes contaminated easily.

·

Do not use any tools in this procedure.

·

Do not forcefully bend or twist the tube.

·

Put the tube in a plastic bag to prevent damage and contamination.

·

If the fuel suction plate and tube are stuck together, pinch the tube and turn it carefully to disconnect it.

·

Be careful not to damage the clip. If the clip is damaged, replace it.




Hide 77168A 4.REMOVE FUEL TANK VENT TUBE SET PLATE

a.
A124675

Remove the 8 bolts and fuel tank vent tube set plate.


Hide 5.REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP

a.
A124676

Slide the clamp and disconnect the fuel hose and remove the fuel suction with pump from the fuel tank assembly.

NOTICE:

Do not damage the fuel suction tube assembly with pump.



b.
A126699C01
2.66,0.449 2.849,0.612 0.189,0.163 10 *1 2.179,0.528 2.63,0.528 false
*1 Gasket


Remove the gasket from the fuel suction tube assembly with pump.