16100
1.INSTALL ENGINE WATER PUMP ASSEMBLY
| *1 | Protrusion |
Align the protrusion of a new gasket with the cutout in the timing chain cover and install the gasket to the groove of the timing chain cover.
Be sure to clean the contact surfaces.
|
Bolt A |
|
Bolt B |
Install the engine water pump assembly with the 5 bolts.
| Item | Length |
|---|---|
| Bolt A | 35 mm (1.38 in.) |
| Bolt B | 25 mm (0.984 in.) |
27020
2.INSTALL GENERATOR ASSEMBLY
3.ADD ENGINE COOLANT
4.INSPECT FOR COOLANT LEAK
51441
5.INSTALL NO. 1 ENGINE UNDER COVER