Home › Engine / Hybrid System › 3ZR-FAE COOLING › COOLING FAN MOTOR
RM3090E _51 Engine / Hybrid System _008391 3ZR-FAE COOLING _0046840 COOLING FAN MOTOR G

3ZR-FAE COOLING  COOLING FAN MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16363 1.INSPECT COOLING FAN MOTOR

a.
A270860

Disconnect the cooling fan motor connector.


b.

Check that the fan rotates smoothly by hand.


c.

Check that the motor turns smoothly when the battery is connected to the cooling fan motor connector.


d.

Measure the current according to the value(s) in the table below.

Standard Current:
Tester Connection Condition Specified Condition
2 (+) 20°C (68°F) 5.5 to 7.5 A


If the result is not as specified, replace the cooling fan motor.


e.

Connect the cooling fan motor connector.


Hide 16363A 2.INSPECT NO. 2 COOLING FAN MOTOR

a.
A270861

Disconnect the No. 2 cooling fan motor connector.


b.

Check that the fan rotates smoothly by hand.


c.

Check that the motor turns smoothly when the battery is connected to the No. 2 cooling fan motor connector.


d.

Measure the current according to the value(s) in the table below.

Standard Current:
Tester Connection Condition Specified Condition
2 (+) 20°C (68°F) 5.5 to 7.5 A


If the result is not as specified, replace the No. 2 cooling fan motor.


e.

Connect the No. 2 cooling fan motor connector.