Home › Engine / Hybrid System › 3ZR-FAE LUBRICATION › LUBRICATION SYSTEM
RM3090E _51 Engine / Hybrid System _008392 3ZR-FAE LUBRICATION _0046843 LUBRICATION SYSTEM G

3ZR-FAE LUBRICATION  LUBRICATION SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK ENGINE OIL QUALITY

a.

Check the oil for deterioration, water contamination, discoloration or thinning.

If the quality is visibly poor, replace the engine oil and oil filter.

Click hereEngine / Hybrid System>3ZR-FAE LUBRICATION>OIL AND OIL FILTER>REPLACEMENT


Hide 2.CHECK ENGINE OIL LEVEL

a.

Warm up the engine, and then stop the engine and wait for 5 minutes.


b.
A296322C01
0.948,1.583 1.083,1.896 1.083,1.896 1.25,1.896 true 1.833,1.073 2.031,1.427 2.031,1.427 2.25,1.427 true 1.385,1.313 1.167,0.938 1.167,0.938 1,0.938 true 1.292,1.781 1.479,1.969 0.188,0.188 10 *b 0.771,0.813 0.979,1.01 0.208,0.198 10 *a 2.302,1.313 2.479,1.49 0.177,0.177 10 *c
*a Measuring Surface
*b Low Level Mark
*c Full Level Mark


Check that the oil level is between the dipstick low level mark and full level mark.

If the level is low, check for leakage and add oil up to the full level mark.

NOTICE:

Do not add engine oil above the full level mark.


HINT:
A296320

·

Insert the oil level gauge with the measuring surface facing toward the engine as shown in the illustration.

·

A certain amount of engine oil will be consumed while driving. In the following situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals.

·

When the engine is new, for example directly after purchasing the vehicle or after replacing the engine.

·

If low quality oil or oil of an inappropriate viscosity is used.

·

When driving at high engine speed or with a heavy load, when towing, or, when driving while accelerating or decelerating frequently.

·

When leaving the engine idling for a long time, or when driving frequently through heavy traffic.



When judging the amount of oil consumption, keep in mind that the oil may have become diluted, making it difficult to judge the true level accurately.



Hide 3.INSPECT OIL PRESSURE

a.

Remove the engine oil pressure switch assembly.

Click hereEngine / Hybrid System>3ZR-FAE LUBRICATION>OIL PRESSURE SWITCH>REMOVAL


b.
A154775C01
0.24,0.208 0.375,0.208 0.375,0.208 0.438,0.385 false 0.063,0.125 0.271,0.313 0.208,0.188 10 *1
*1 Oil Pressure Gauge


Install an oil pressure gauge.


c.

Warm up the engine.


d.

Measure the oil pressure.

Standard Oil Pressure:
Item Specified Condition
Idle 25 kPa (0.3 kgf/cm2, 3.6 psi) or higher
3000 rpm 150 to 400 kPa (1.5 to 4.1 kgf/cm2, 22 to 58 psi)


If the oil pressure is not as specified, check the oil pump.

Click hereEngine / Hybrid System>3ZR-FAE LUBRICATION>OIL PUMP>INSPECTION


e.

Remove the oil pressure gauge.


f.

Install the engine oil pressure switch assembly.

Click hereEngine / Hybrid System>3ZR-FAE LUBRICATION>OIL PRESSURE SWITCH>INSTALLATION


g.

Check for engine oil leaks.