Home › Engine / Hybrid System › 3ZR-FAE ENGINE CONTROL › ACCELERATOR PEDAL
RM3090E _51 Engine / Hybrid System _008381 3ZR-FAE ENGINE CONTROL _0046859 ACCELERATOR PEDAL A

3ZR-FAE ENGINE CONTROL  ACCELERATOR PEDAL  INSTALLATION  


PROCEDURE

Hide 78110K 1.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for RHD)

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.

Install the accelerator pedal sensor assembly with the 2 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.


·

Do not disassemble the accelerator pedal sensor assembly.




b.

Connect the accelerator pedal sensor assembly connector.


Hide 78110K 2.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for LHD)

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.

Install the accelerator pedal sensor assembly with the 2 bolts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.


·

Do not disassemble the accelerator pedal sensor assembly.




b.

Connect the accelerator pedal sensor assembly connector.