Home › Engine / Hybrid System › 3ZR-FAE ENGINE CONTROL › ACCELERATOR PEDAL
RM3090E _51 Engine / Hybrid System _008381 3ZR-FAE ENGINE CONTROL _0046859 ACCELERATOR PEDAL A

3ZR-FAE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for LHD)

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A293350
0.021,0.021 0.333,0.177 0.313,0.156 10 *A 0.031,2.448 0.344,2.604 0.313,0.156 10 *B
*A for Manual Transaxle
*B for CVT


Disconnect the accelerator pedal sensor assembly connector.


b.

Remove the 2 bolts and accelerator pedal sensor assembly.

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.


·

Do not disassemble the accelerator pedal sensor assembly.




Hide 78110K 2.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY (for RHD)

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A293351
0.042,0.042 0.354,0.198 0.313,0.156 10 *A 0.052,2.521 0.365,2.677 0.313,0.156 10 *B
*A for Manual Transaxle
*B for CVT


Disconnect the accelerator pedal sensor assembly connector.


b.

Remove the 2 bolts and accelerator pedal sensor assembly.

NOTICE:
·

Avoid physical shocks to the accelerator pedal sensor assembly.


·

Do not disassemble the accelerator pedal sensor assembly.