Home › Engine / Hybrid System › 3ZR-FAE ENGINE CONTROL › MASS AIR FLOW METER
RM3090E _51 Engine / Hybrid System _008381 3ZR-FAE ENGINE CONTROL _0046860 MASS AIR FLOW METER A

3ZR-FAE ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repairs" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>3ZR-FAE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

a.

Install the mass air flow meter sub-assembly with the 2 screws.

NOTICE:
·

When reusing the mass air flow meter sub-assembly, inspect the O-ring.

·

Make sure that the O-ring is not cracked or jammed during installation.



HINT:

Perform "Inspection After Repairs" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>3ZR-FAE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION



b.

Connect the mass air flow meter sub-assembly connector.