Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM3090E _51 Engine / Hybrid System _008396 2AR-FE ENGINE MECHANICAL _0046875 FRONT CRANKSHAFT OIL SEAL A

2AR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11301C 1.INSTALL TIMING CHAIN COVER OIL SEAL

a.

Apply MP grease to the lip of a new oil seal.

NOTICE:
·

Do not allow foreign matter to contact the lip of the oil seal.

·

Do not allow MP grease to contact the dust seal.




b.
A195808E01
0.506,0.162 0.821,0.332 0.316,0.170 10 SST 0.874,0.248 1.072,0.248 1.072,0.248 1.716,0.806 false

Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.

SST
09223-22010  

NOTICE:
·

Keep the lip of the oil seal free from foreign matter.

·

Do not tap in the oil seal at an angle.




Hide 51217A 3.INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH

Hide 16361A 4.INSTALL FAN AND GENERATOR V BELT

Hide 16470 5.CONNECT RADIATOR RESERVOIR ASSEMBLY

Hide 51443 6.INSTALL REAR ENGINE UNDER COVER RH

Hide 51441 7.INSTALL NO. 1 ENGINE UNDER COVER