Home › Engine / Hybrid System › 2AR-FE EMISSION CONTROL › PURGE VALVE
RM3090E _51 Engine / Hybrid System _008398 2AR-FE EMISSION CONTROL _0046891 PURGE VALVE A

2AR-FE EMISSION CONTROL  PURGE VALVE  INSTALLATION  


PROCEDURE

Hide 25860 1.INSTALL PURGE VSV

a.

Install the purge VSV to the air cleaner hose with the claw.


b.

Connect the fuel vapor feed hose and No. 2 fuel vapor feed hose to the purge VSV, and slide the 2 clamps to secure it.


c.

Attach the wire harness clamp.


d.

Connect the purge VSV connector.