Home › Engine / Hybrid System › 2AR-FE INTAKE / EXHAUST › INTAKE AIR CONTROL VALVE ACTUATOR(for TCV)
RM3090E _51 Engine / Hybrid System _008399 2AR-FE INTAKE / EXHAUST _0046896 INTAKE AIR CONTROL VALVE ACTUATOR(for TCV) G

2AR-FE INTAKE / EXHAUST  INTAKE AIR CONTROL VALVE ACTUATOR(for TCV)  INSPECTION  


PROCEDURE

Hide 17335 1.INSPECT INTAKE AIR CONTROL VALVE ACTUATOR

a.

Check the intake air control valve actuator operation.

i.
A197176
0.896,3.083 1.031,3.083 1.031,3.083 1.083,2.719 true 1.479,3.083 1.323,3.083 1.323,3.083 1.26,2.719 true 0.427,2.99 0.917,3.188 0.49,0.198 10 5 (M+) 1.531,3 1.979,3.198 0.448,0.198 10 4 (M-) 0.052,0.052 0.219,0.208 0.167,0.156 10 *a
*a Component without harness connected
(Intake Air Control Valve Actuator)


Check that the motor operates when the battery is connected to the terminals of the intake air control valve actuator.

Standard:
Tester Connection Specified Condition
Positive (+) battery voltage applied to terminal 4 (M-), and negative (-) battery voltage applied to terminal 5 (M+) Motor rotates clockwise
Positive (+) battery voltage applied to terminal 5 (M+), and negative (-) battery voltage applied to terminal 4 (M-) Motor rotates counterclockwise


If the result is not as specified, replace the intake air control valve actuator.

NOTICE:

If the positive and negative battery leads contact the terminals for the sensor, the actuator may be damaged.