Home › Engine / Hybrid System › 2AR-FE INTAKE / EXHAUST › INTAKE AIR CONTROL VALVE ACTUATOR(for TCV)
RM3090E _51 Engine / Hybrid System _008399 2AR-FE INTAKE / EXHAUST _0046896 INTAKE AIR CONTROL VALVE ACTUATOR(for TCV) A

2AR-FE INTAKE / EXHAUST  INTAKE AIR CONTROL VALVE ACTUATOR(for TCV)  REMOVAL  


PROCEDURE

Hide 17335 2.REMOVE INTAKE AIR CONTROL VALVE ACTUATOR

a.
A196059

Remove the 2 bolts, intake air control valve actuator and gasket from the intake manifold.

NOTICE:
·
A203084

Make sure that foreign matter, such as water, oil, sand and iron particles, does not enter the gear chamber or actuator at the locations marked by the circles in the illustration.

·
A197294

Do not loosen or remove the bolt and 2 nuts shown in the illustration.