16331A
1.INSTALL THERMOSTAT
Install a new gasket to the thermostat.
| *1 | Jiggle Valve |
Install the thermostat with the jiggle valve facing upward.
The jiggle valve may be set to within 10° on either side of the prescribed position.
16321
2.INSTALL WATER INLET
Install the water inlet with the 2 nuts.
16572D
3.CONNECT NO. 2 RADIATOR HOSE
Connect the No. 2 radiator hose to the water inlet, and slide the hose clamp to secure it.
27020
4.INSTALL GENERATOR ASSEMBLY
5.ADD ENGINE COOLANT
6.INSPECT FOR COOLANT LEAK
51441
7.INSTALL NO. 1 ENGINE UNDER COVER
12601B
8.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY