Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM3090E _51 Engine / Hybrid System _008378 2AR-FE ENGINE CONTROL _0046925 CAMSHAFT POSITION SENSOR A

2AR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 11102A 2.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)

A195076

a.

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor.


Hide 11102A 3.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)

A195077

a.

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor.