Home › Engine / Hybrid System › 3ZR-FE ENGINE MECHANICAL › DRIVE BELT
RM3090E _51 Engine / Hybrid System _008405 3ZR-FE ENGINE MECHANICAL _0046943 DRIVE BELT A

3ZR-FE ENGINE MECHANICAL  DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL V-RIBBED BELT

a.

Install the V-ribbed belt.


Hide 16361A 2.ADJUST V-RIBBED BELT

a.
A297844N01
2.073,0.615 2.229,0.813 0.156,0.198 10 A 2.698,1.333 2.854,1.531 0.156,0.198 10 B 3.094,0.094 3.25,0.292 0.156,0.198 10 C 1.49,0.417 1.646,0.615 0.156,0.198 10 D

Turn bolt C to adjust the tension of the V-ribbed belt.


b.

Tighten bolts A and B.

Torque:
for bolt A : 25 N*m (255 kgf*cm, 18 ft.*lbf)
for bolt B : 43 N*m (438 kgf*cm, 32 ft.*lbf)

NOTICE:

Confirm that bolt D has not been loosened.



Hide 51443 4.INSTALL REAR ENGINE UNDER COVER RH

a.

Install the rear engine under cover RH with the 4 clips.


Hide 11212 5.INSTALL NO. 2 CYLINDER HEAD COVER