Home › Engine / Hybrid System › 3ZR-FE ENGINE MECHANICAL › CYLINDER HEAD › 2012.12–2014.10
RM3090E _51 Engine / Hybrid System _008405 3ZR-FE ENGINE MECHANICAL _0046951 CYLINDER HEAD A

3ZR-FE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A150946E02
1.413,0.22 1.745,0.381 0.333,0.161 10 SST 1.803,0.314 1.897,0.314 1.897,0.314 1.948,0.563 false

Place the cylinder head on wooden blocks.


b.

Using SST, compress the inner compression spring and remove the valve retainer locks.

SST
09202-70020  (09202-00010)

HINT:

Arrange the removed parts in the correct order.



c.

Remove the retainer, inner compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.

Place the cylinder head on wooden blocks.


b.
A150947E02
0.114,0.191 0.447,0.352 0.333,0.161 10 SST 0.505,0.284 0.598,0.284 0.598,0.284 0.649,0.533 false

Using SST, compress the inner compression spring and remove the valve retainer locks.

SST
09202-70020  (09202-00010)

HINT:

Arrange the removed parts in the correct order.



c.

Remove the retainer, inner compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 3.REMOVE VALVE STEM OIL SEAL

a.
A150948

Using needle-nose pliers, remove the valve stem oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A150949

Using compressed air and a magnet hand, remove the valve spring seats by blowing air onto them.


Hide 11117B 5.REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:
A150950

If water leaks from the No. 2 straight screw plug or the plug in corroded, replace it.


a.

Using a 10 mm straight hexagon wrench, remove the 3 No. 2 straight screw plugs and 3 gaskets.


Hide 6.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.