Home › Engine / Hybrid System › 3ZR-FE FUEL › FUEL PRESSURE REGULATOR
RM3090E _51 Engine / Hybrid System _008406 3ZR-FE FUEL _0046955 FUEL PRESSURE REGULATOR A

3ZR-FE FUEL  FUEL PRESSURE REGULATOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereEngine / Hybrid System>3ZR-FE FUEL>FUEL SYSTEM>PRECAUTION


PROCEDURE

Hide 1.REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP

Hide 77131C 2.REMOVE NO. 1 FUEL SUB-TANK

Hide 77174 3.REMOVE NO. 1 FUEL SUCTION SUPPORT

Hide 23280J 5.REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

a.
A237616

Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly.

NOTICE:

Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the fuel pressure regulator assembly and fuel filter assembly.



b.
A148186C14
0.422,0.343 0.601,0.481 0.179,0.138 10 *1 1.588,0.646 1.588,0.423 1.588,0.423 0.629,0.423 false 0.928,1.408 0.928,0.423 false
*1 O-Ring


Remove the 2 O-rings from the fuel pressure regulator assembly.