Home › Engine / Hybrid System › 3ZR-FE FUEL › FUEL SENDER GAUGE ASSEMBLY
RM3090E _51 Engine / Hybrid System _008406 3ZR-FE FUEL _0046958 FUEL SENDER GAUGE ASSEMBLY G

3ZR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.

Check that the float moves smoothly between F and E.


b.
A197972
1.063,1.729 0.385,1.729 false 1.073,3.063 0.385,3.063 false 0.896,2.406 0.188,2.406 false 0.854,0.979 0.979,1.146 0.125,0.167 10 2 1.104,0.979 1.229,1.146 0.125,0.167 10 1 0.385,1.76 0.51,1.917 0.125,0.156 10 F 0.188,2.438 0.448,2.604 0.26,0.167 10 1/2 0.385,3.094 0.531,3.26 0.146,0.167 10 E 0.052,0.042 0.365,0.198 0.313,0.156 10 *a
*a Component without harness connected
(Fuel Sender Gauge Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Float position is F
(upper)
13.5 to 16.5 Ω
Float position is 1/2 200.2 to 224.8 Ω
Float position is E
(lower)
405.5 to 414.5 Ω


If the value is not as specified, replace the fuel sender gauge assembly.